FEATURES AND OPERATION
PAPER ROLL REPLACEMENT
STIRRUP POSITIONING & ADJUSTMENT
PELVIC TILT
3-00077-0318A
Max Roll Size........ 21" x 3.5" (53cm x 9cm)
Slide rod out of brackets, install new roll, and
reinstall into brackets
1. Pull the stirrups out and unfold.
2. Lift slightly and move left or right to position.
3) Release stirrup to lock into position.
WARNING:
DO NOT SUPPORT THE
PATIENT'S ENTIRE WEIGHT
WITH THE STIRRUPS.
1. Lift up seat section and flip the pelvic support arm.
2. Place seat section down to secure the mechanism.
Page 11