Table of Contents
Advertisement
IMPORTANT INFORMATION
Safety First: This equipment must be operated and maintained with the safety of the patient and doctor in mind.
Read this manual before operating your new UMF Medical equipment.
1
This product is intended to be used for positioning of patients during medical examinations conducted by
2
qualified medical personnel.
This manual should remain permanently affixed or near the equipment for convenient reference.
3
UMF Medical reserves the right to make changes to the design of products at any time and without notice.
4
CLASSIFICATIONS
Equipment Class – Class I
Protection against electric shock: Type B applied parts
Protection against harmful ingress of water: Ordinary Equipment
is not suitable for use in the presence of a flammable anesthetics
mixture with air or with oxygen or with nitrous oxide .
Mode of Operation: Continuous operation with intermittent
loading 1 minute on 9 minutes off or 2 minutes on, 18 minutes off.
This product has been evaluated with respect to electrical shock,
fire, & mechanical hazards only, in accordance with UL60601-1
and CAN/CSA-22.2 No. 601.1
SAFETY SYMBOLS
WARNING:
The warning symbol identifies
special instructions or procedures,
which if not correctly followed
could result in personal injury.
UL CLASSIFICATION MARK WITH RESPECT TO ELECTRIC
SHOCK, FIRE AND MECHANICAL HAZARDS ONLY IN
ACCORDANCE WITH UL60601-1.
ATTENTION, CONSULT ACCOMPANYING DOCUMENTS
TYPE B APPLIED PART
ENVIRONMENTAL CONDITIONS
TRANSPORT/STORAGE TEMPERATURE: -20ºC to 40ºC
TRANSPORT/STORAGE/OPERATING HUMIDITY: 95% maximum
OPERATING TEMPERATURE: 0ºC to 40ºC
CAUTION:
The caution symbol identifies special
instructions or procedures, which if
not properly followed could result in
danger or damage to equipment.
2
Advertisement
Table of Contents
