FEATURES AND OPERATION
STORAGE DRAWERS
LEG EXTENSION & DRIP PAN
LEG REST PAD
3-00077-0318A
SIDE DRAWER
24.5" x 12.5" x 3.5"
(62cm x 32cm x 9cm)
FRONT DRAWER
19.0" x 12.0" x 3.5"
(48cm x 30cm x 9cm)
1. Slide pad forward until it makes contact with the
2. Lift the front of leg pad until it clears the two pins and
3. Lower the front of the leg pad. The two pins will enter
1. Slide the leg section out.
2. Lift front of the leg pad to disengage from locked
position.
3. Slide leg pad toward rear of table.
WARNING:
DO NOT USE THE LEG REST TO
SUPPORT PATIENT'S ENTIRE
WEIGHT.
two pins toward the front of the leg section.
pull the leg pad forward.
slots located on the bottom of the leg pad, preventing
movement.
CAUTION:
WITH LEG REST PAD IN TILTED
POSITION, THE FRONT SLIDE PINS
ON PAD MUST SEAT AGAINST
BUMPER STOPS IN THE LEG
SECTION. THE TILT SUPPORTS
MUST BE FULLY EXTENDED FROM
UNDERNEATH PAD.
Page 10