Configuring The Ux 301 For The First Time; Preparing Your Firewall; Setting Up Pc / Ecr Communication - VeriFone UX 301 Quick Reference Manual

2.4 Configuring the UX 301 for the first time

Your integrator will configure the device to work with your electronic cash register (ECR) software.

2.5 Preparing your firewall

During synchronization with Moneris, the UX 301 is configured to communicate with the Moneris host.
Action: Ensure your firewall allows access to the URLs and ports shown in the table below.
Note: Only production hardware can connect to the production host. Development hardware must be used to
connect to the development host.
The UX 301 solution will connect to these URLs and IP addresses in the production environment.
System Description
Moneris host
Moneris Terminal
Management System
(TMS)

2.6 Setting up PC / ECR communication

1. On the UX 100 keypad, press the FUNC key when the UX 100 displays the software version. You have a
2-second window during the start-up process to access the Setup Menu. (If you miss the 2-second window,
refer to Restarting the application on page 13.)
CA 4.01-C
Please wait...
Attendez SVP...
Getting Started Guide - Moneris UX 301 with Direct Connect
URL
ipg1.moneris.com
tms.moneris.com
Port 1124
IP Addresses (Site 1)
23.249.192.33
SETUP MENU
Info
Sync with Moneris
ECR COM
Language
IP Addresses (Site 2)
23.249.200.33
8