EK-Quantum Vector XC3 RTX 3080/3090 Active Backplate User Manual page 2

This product is intended for installation by expert users only. Please
consult with a qualified technician. Improper installation may result
in damage to your equipment. EK assumes no liability whatsoever,
expressed or implied, for the use of this product or its installation. The
following instructions are subject to change without notice. Please, read
the manual carefully before beginning with the installation process. For
updates, you can visit our official website www.ekwb.com.
Before you start using this product, please follow these basic guidelines:
Carefully read the manual before beginning with the
installation process.
Remove your graphics card from the computer for the safest
mounting process to prevent any possible damage to your
GPU or its circuit board (PCB).
EK Fittings require only a small amount of force to screw
them firmly in place since the liquid seal is ensured with the
rubber O-ring gaskets.
The use of quality
coolants is always strongly recommended for any liquid
cooling system.
Do not use pure distilled water as a cooling liquid!
For best results, EK recommends the use of EK-CryoFuel
Coolants.
Make sure to bleed air out of your water block thoroughly in
order to reach optimal performance.
market-proven corrosion-inhibiting