Connect Network - Screen Technics ELECTRICINEMA Manual

3. Connect Network

a. Connect Network uses a RJ11 6P6C Plug 6 core wired straight through
b. 50 Meter maximum cable length between modules
c. Connect network carries commands when connected to other Connect Modules
d. Maximum of 8 Modules Total, including Connect IP module
4. Infra-Red Input
a. Supplied with 2 channel IR transmitter
b. Supplied with IR receiver with 300mm and 1.2M input lead
c. IR operates on Group 1 & 2 as standard
5. RJ45 LAN Input
a. DHCP or Static IP addressable
b. Internal Web Browser
c. TCP/IP controllable
6. PC or Mac Connect Software
a. As the module is DHCP default, this software will allow simple operation and identification of
IP address and port number of IP connect modules on network
b. PC Connect software will search for Connect IP Modules on the network
c. Screen shot below showing module, IP address using PC Connect
d. Connect to module