Advertisement
Quick Links
CinemaSnap Projection Screen
Thank you for purchasing a Screen Technics Projection Screen, please ensure that you read
the following instructions fully before attempting to install this product.
Step 1.
Layout all components ready for assembly as shown below.
Step 2.
Push the four corners of the frame together. You may need to use a plastic or
wooden mallet (not metallic) to achieve this result.
Installation Instructions
&
1
Advertisement
Related Manuals for Screen Technics CinemaSnap Series
Summary of Contents for Screen Technics CinemaSnap Series
- Page 1 CinemaSnap Projection Screen & Installation Instructions Thank you for purchasing a Screen Technics Projection Screen, please ensure that you read the following instructions fully before attempting to install this product. Step 1. Layout all components ready for assembly as shown below.
- Page 2 Step 3. With the Hex Head Allen-Key screw use the provided Allen-Key to screw tight all four corners. You must ensure each of the four corners are square and there are no large gaps obvious before you start to insert Hex head Allen-Key screw, otherwise jamming may occur.
- Page 3 Step 6. Attach brackets as shown – Utilizing nylon bushes and locating holes only if necessary as explained in previous step. Step 7. With all four brackets attached, place screen frame (not with surface) on the wall and mark holes.
- Page 4 Step 8. Use wall mates or plugs to attach frame if no wall studs are present and ensure that you have a secure fixing method for a safe installation. tep 9. Remove frame from the wall by undoing outside bracket screws - Brackets are to remain on wall.
- Page 5 Step 11. Once all four rods have been placed into the screen sleeve, attach the screen surface to the frame as shown below - ensuring to work the screen surface evenly to all four sides. Step 12. Once all four sides of the screen surface have been placed evenly, the screen surface should be attached to the frame as shown below.
- Page 6 Should you have any questions regarding the installation of our projection screens please call our technical sales desk on 02 4869 2100 for assistance. Cnr Vale & Suttor Roads Moss Vale NSW 2577 PH – 02 4869 2100 Fax – 02 4869 2123 Thinking Screens… Think Screen Technics...