Operation
58
Interrupting a program
The factory default setting prevents interruption of programs while
they are running. If required, this function can be activated by Miele
Technical Service.
A program which is already running should only be interrupted if
strictly necessary, e.g. if the wash load is moving about significantly.
Be careful when opening the door.
The wash load could be hot. Danger of scalding, burning, and
chemical burns.
Press the button.
You are asked if you really wish to open the door.
If the temperature in the wash chamber is above 60 °C at the
moment, it is first necessary to acknowledge the following message:
Confirm the message with OK.
Open door?
Use the and arrow buttons to select
By pressing the OK button the program is interrupted.
Yes
Selecting
interrupts the program and the door opens. The display
shows the following message:
Rearrange the items so that they are stable and close the door.
The program continues from the point at which the interruption
occurred. Every program interruption is recorded in the cycle report.
If no button is pressed for several seconds, or if the process is
cancelled using the button, the display will revert to the program
sequence display. The program is not interrupted.
Warning! Cabinet hot.
Open anyway?
Yes
No
Program interrupted:
Door open
Yes
.