Miele PG 8583 Operating Instructions Manual page 132

Problem solving guide
Problem
The cleaning result is
unsatisfactory.
Items made of glass are
showing signs of
corrosion.
132
Possible cause and solution
Wash carts, baskets, modules and inserts were not
suitable for the load.
Select wash carts, baskets, modules and inserts which

are suitable for the task.
Wash carts, baskets, inserts and modules were incorrectly
loaded or overloaded.
Arrange the wash load correctly according to the

information in the Operating instructions.
Avoid overloading the wash carts, baskets, modules and

inserts.
The program was not suitable for the soiling.
Select a suitable program.

or
Adjust the parameters to suit the task.

A spray arm is blocked.
Ensure the spray arms are not obstructed when

arranging the wash load.
Injector nozzles on the wash carts, baskets, modules or
inserts are blocked.
Check the nozzles and clean them as necessary.

The filters in the wash cabinet are dirty.
Check the filters and clean them if necessary.

Wash carts, baskets or modules were not correctly
mounted on the water connection.
Check the adapter.

The items are not suitable for machine reprocessing.
Only use items which are declared by their manufacturer

as suitable for machine reprocessing.
Neutralization has not taken place during the program.
Check the level in the supply container and vent the

dispensing system if necessary.
The wash temperature was too high.
Select a different program.

or
Reduce the wash temperature.

Cleaning detergents used were too alkaline.
Use a milder cleaning detergent.

or
Reduce the concentration of the cleaning detergent.
