Miele PG 8583 Operating Instructions Manual page 27

Commissioning
completed
Fault 420
Commissioning is completed when the following message is
displayed.
Confirm the message with OK.

The machine is now ready for use.
The settings made during the commissioning process are only
adopted after a complete program has been run.
Select any program, e.g.:

Press the Start/Stop button to start the program.

After commissioning every program starts with reactivation of the
water softener.
If the program is canceled using
connections are deactivated.
Confirm the error message with OK.

Switch the machine off using the  button.

Wait approximately 10 seconds before switching the machine on

again with the  button.
The commissioning procedure starts again.
Perform commissioning and activate at least one plumbing

connection; e.g. for cold water.
Set up successful
Universal
Temperature
75 °C
Duration
1:30
Drain
.
Fault 420
Commissioning
h
, all the plumbing
27