Miele PG 8583 Operating Instructions Manual page 52

Adding and dispensing process chemicals
Replenishing
liquid cleaning
agent
Checking
consumption
52
Liquid cleaning agent is dispensed from an external container, e.g. a
canister.
Place the liquid cleaning agent container (blue marking) on the open

cabinet door or on a surface which is robust and easy to clean.
Take the lid off the canister and remove the suction lance. Place the

suction lance on the open wash cabinet door.
Replace the empty container with a full one.

Push the suction lance into the opening of the container and secure

the lid. Observe the colour coding.
Feed the suction lance into the container until it reaches the

bottom.
Wipe up any spilled process chemical thoroughly.

Place the container on the floor next to the machine or in an

adjacent cupboard. The container must not be placed on top of or
above the machine. Make sure that the dispensing hose is not
kinked or trapped.
The dispensing system must then be vented (see "Settings  /

Venting DOS").
Check consumption regularly by checking the fill levels in the supply
containers and replace containers in good time to avoid the
dispensing system being sucked completely dry.