Alternative - APMM Power Module Installation for Cab-Mate One continued
STEP EIGHT
Connect the APMM harness to the AUX1 and LMU DIAG ports on the top of the APMM module.
STEP NINE
Mount the Cab-Mate One/APMM
assembly to the dash using the Panavise
ball mount (not pictured).
STEP TEN
Connect the diagnostic cable to the port
on the APMM labled "VEHICLE DIAG" on
the bottom of the APMM module.
STEP ELEVEN
Connect the CameraView USB cable to the
USB adapter cable.
STEP TWELVE
Connect the 10 pin plug from the USB
adapter cable into the port on the side
of the APMM power module.
PedigreeTechnologies.com | Support: (701)-499-0022
Top view
7
CameraView
Front Facing
Bottom view