Test Camera Functionality
STEP ONE
Start the truck's engine.
STEP TWO
Make sure that the camera has power (indicated by
the blue LED next to the camera lens, may take 30-45
seconds to receive power).
STEP THREE
On the tablet, open POV, but stay logged out.
STEP FOUR
Tap the 3-dots menu
STEP FIVE
The app will look for cameras near you, and
as long as there is power to your camera,
the app will find it. It will take 30 to 60
seconds to find and connect the camera.
Once it connects, you will see the view from
the camera, allowing you to adjust angle if
necessary.
GOOD MOUNTING TIPS
•
Metrics visual detection happens within red square
area (image on right)
•
Horizon line (in red below) must be level with more
road than sky
•
Field of view in green area
•
No occulsions in field of vision.
Good = level horizon, road in range
PedigreeTechnologies.com | Support: (701)-499-0022
in the upper right corner of POV, and then select "Camera Setup".
10
CameraView
Front Facing
Blue LED next to camera lens
View from camera
Bad = too much sky