Table of Contents
Advertisement
Installation Steps, Continued
Dry Fit
Determine proper placement of camera on the
front windshield. (Dry fit only. It's important to run
cabling to power source and determine where it will
fit properly.)
• High on the windshield behind the rearview mirror
area or right of center divider (slightly to the
passenger side)
• Highest possible placement within the wiper
blade path
• Avoid any overhanging exterior sun visor or other
materials on glass including rock chips or cracks.
Installation Steps, Continued
Power Cable
Route the cable inside the headliner and A pillar to the power box. (Avoid airbags and other
hardware inside the A pillar.) Cables and wiring should not be visible after installation is complete.
PedigreeTechnologies.com | Support: (701)-499-0022
3
CameraView
Front Facing
Advertisement
Table of Contents
