Table of Contents
Advertisement
Alternative - APMM Power Module Installation for Cab-Mate One continued
STEP FIVE
Secure the APMM bracket to the Cab-Mate One by sandwiching it between the Cab-Mate One
and the ball mount using the supplied screw and washer pack. (Use the longer machine screws
provided, paired with star washers.)
+
Ball Mount
STEP SIX
Secure the APMM module to bracket using the supplied double-sided tape with the text side
facing up as pictured below.
STEP SEVEN
Connect the 16pin and 6 pin plugs of the APMM harness to the ports on the bottom of the Cab-
Mate One. (For previously installed Cab-Mate One, remove 16 pin connector from bottom of Cab-
Mate One and replace with the APMM harness.)
APMM Harness
PedigreeTechnologies.com | Support: (701)-499-0022
APMM Bracket
+
=
6
+
Cab-Mate One
Bottom view
CameraView
Front Facing
Advertisement
Table of Contents
