Basic Settings - Siemens WD4HU541DN Instruction Manual And Installation Instructions

Basic settings

To access the basic settings, touch and
hold the ç (Silent) button for approx. 3
seconds. The control panel show:
You can change the following basic
settings:
The volume of the end signal.
■
The volume of the buttons.
■
The brightness of the Touch-Display.
■
Switching the k Drum Clean
■
information signal on/off.
End signal
You can select position 1 and use the
˜ button to adjust the volume of the
end signal, e.g. '- „.
Possible setting values:
0 off
1 quiet
2 medium
3 loud
4 very loud
Appliance settings
Button signal
You can select position 2 and use the
˜ button to adjust the volume of the
button signal, e.g. ›- „.
Possible setting values:
0 off
1 quiet
2 medium
3 loud
4 very loud
Brightness
Possible setting values: 1 - 4
You can select position 3 and use the
˜ button to adjust the brightness of the
Touch-Display, e.g. '- „.
Possible setting values:
1 not very bright
2 normal level of
brightness
3 bright
4 very bright
en
51