Page 1
Washer dryer WD15G442DN siemens-home.bsh-group.com/welcome Register your product online...
Page 2
Your new washer dryer Display rules : Warning! You have chosen a Siemens washer dryer. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Selecting the programme/Switching on Intended use.
Intended use Drainage hose on the siphon blocked Intended use ......41 Filter in the water inlet hose blocked 42 This appliance is intended for private ■...
Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. T he following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■...
Safety instructions The mains plug and the Warning ■ protective contact socket Risk of poisoning! must match and the earthing Detergents and care products system must be correctly may result in poisoning if installed. consumed. The installation must have an If accidentally swallowed, seek ■...
Page 7
Safety instructions The appliance has sharp Warning Ri s k of i n j u ry! ■ edges on which you could Risk of fire/material damage/ cut your hands. damage to the appliance! Do not take hold of the The use of extension cords or appliance by its sharp power strips may result in fire edges.
Safety instructions The use of hoses supplied Rinse the laundry thoroughly ■ ■ by other brands to connect with warm water and to the water supply may detergent before drying it in result in material damage or the machine. damage to the appliance. Do not place laundry in this ■...
Page 9
Safety instructions Warning Warning Risk of fire/material damage/ Risk of injury! damage to the appliance! If you support your weight/sit ■ If a program is terminated on the appliance door when before the drying cycle has it is open, the appliance may finished, this prevents the tip over, which may result in laundry from cooling down...
Safety instructions products. If accidentally Cleaning/Maintenance swallowed, seek medical Warning advice. Risk of death! Caution! The appliance is powered by Material damage/damage to electricity. There is a risk of the appliance electric shock if you come into contact with live components. If the amount of laundry in ■...
Protection of the environment Warning Protection of the Risk of electric shock/material environment damage/damage to the appliance! P ackaging/old appliance If moisture penetrates the P r o t e c t i o n o f t h e e n v i r o n m e n t appliance, this may cause it to short circuit.
Positioning and connecting @ Water drain hose Positioning and H Elbow for securing the water connecting drain hose* P Water supply hose on standard/ Aqua-Secure models I ncluded with the appliance P o s i t i o n i n g a n d c o n n e c t i n g depending on the model Check the machine for transport Note:...
Positioning and connecting Installing the appliance in a Caution! Water damage kitchenette The connection points for the water supply hose and water drain hose are Warning under high water pressure. To prevent Danger of death! leaks and water damage, you must There is a risk of electric shock if you follow the instructions in this section.
Positioning and connecting Keep the screws and sleeves in Hose and cable lengths Note: a safe place. Connection on left side Take the hoses out of the holders. Connection on right side Unscrew and remove all four transportation securing bolts with a wrench (WAF 13).
Positioning and connecting Water inlet Connection Connect the water supply hose to the Warning tap (26.4 mm = ¾") and to the Danger of death! appliance (not necessary for Aqua-Stop There is a risk of electric shock if you models as this is permanently installed): touch live components.
Positioning and connecting Water outlet Connection Drainage into a siphon Warning ■ The connection point must be Risk of scalding! secured using a hose clamp with a When washing at high temperatures, diameter of 24–40 mm (available there is a risk of scalding if you come from specialist dealers).
Positioning and connecting Alignment Electrical connection Loosen the lock nut in a clockwise Electrical safety direction with a wrench. Check the alignment of the washer Warning dryer with a spirit level and, if Risk of electric shock! required, correct. Adjust the height Risk of death if live parts are touched.
Positioning and connecting Before washing/drying for the Transportation first time Preparatory work Turn off the tap. The washer dryer was inspected Release the water pressure in the thoroughly before leaving the factory. To supply hose. remove any residual test water, run the Filter in the water inlet hose blocked Fluff Clean programme the first time ~ Page 42...
The main points in brief The main points in brief T h e m a i n p o i n t s i n b r i e f Plug into the mains. Open the washer Select the washing/ Max.
Getting to know your appliance Getting to know your appliance W asher dryer G e t t i n g t o k n o w y o u r a p p l i a n c e Detergent drawer Operating/display panel Door with handle 9S Open the door...
Getting to know your appliance Control panel Change the default settings for the selected programme and select additional functions: ( Select a programme. Can be rotated in either direction. To switch off the washer dryer, set the programme selector to Off. 0 Select buttons for changing default settings.
Getting to know your appliance Display panel Displays for the programme (: Temperature for washing Ž (cold) – 90° Temperature in °C programme 0: Programme information 1:50* Programme duration after programme selection in h:min (hours:minutes) Finish in time in h (h=hour) 1 –...
Page 23
Getting to know your appliance @: Programme information w lights up On if childproof lock has been activated ~ Page 30 and additional function symbols w flashes The childproof lock is actived, and if the pro- gramme selector has been adjusted or the buttons have been pressed Õ...
Laundry The numbers in the symbols Note: Laundry indicate the maximum washing temperature that may be used. P reparing laundry for washing L a u n d r y Suitable for normal washing Sorting laundry according to: process; Sort your laundry according to the care e.g.
Laundry Empty any pockets. Remove any The following textiles must not be dried: ■ foreign objects. b = care symbol “Do not dry” ■ Wool or textiles containing wool. ■ Delicates (silk, synthetic curtains). ■ Textiles which contain foam rubber ■...
Operating the appliance Selecting the programme/ Operating the Switching on the appliance appliance Note: P reparing the washer dryer If you have activated the childproof lock, O p e r a t i n g t h e a p p l i a n c e you must deactivate it before you can The washer dryer was tested before set a programme.
Operating the appliance Adjusting the drying Notes Options can be selected, deselected programme ■ or changed depending on the progress of the programme. Note: The buttons are sensitive, they only If an individual drying programme or ■ need to be touched gently. If the washing and drying without interruption button °C (Temp.), 0 (rpm), is selected, you can change the default...
Operating the appliance Loading the laundry Dosing and adding detergent and care product Warning Danger of death! Caution! Laundry items pretreated with solvent- Damage to the appliance based detergents, e.g. stain remover/ Detergents and agents for the petroleum ether, may cause an pretreatment of laundry (e.g.
Operating the appliance Pour in detergent and/or cleaning Measuring aid* for liquid detergent product. *depending on the model Position the measuring aid for measuring the correct amount of liquid detergent: Pull out the detergent drawer. Press down the insert and fully remove the drawer.
Operating the appliance Childproof lock Notes If there is a high water level, high ■ You can secure the washer dryer to temperature or if the drum is prevent the set functions from being rotating, the door remains locked changed inadvertently. To do this, for safety reasons and reloading is activate the childproof lock when the not possible.
Operating the appliance For drying programmes: After washing/drying Select Intensive Dry or Gentle Dry. Open the door and remove the Touch & (Drying) button, and set laundry. drying time to 20 minutes. Turn the programme selector to Off. Touch I (Start/Reload) button. The appliance is switched off.
Overview of programmes Overview of programmes P rogramme on the programme selector O v e r v i e w o f p r o g r a m m e s Programme/Type of washing Options/Information Name of the programme maximum load according to EN50229 Brief explanation of the programme and which textiles it is suitable...
Page 33
Overview of programmes Programme/Type of washing Options/Information Outdoor+ /Water proofing max. 1.0 kg/1 .0kg Weatherproof and outdoor clothing with membrane coating and Ž (cold) – 40 °C water-resistant textiles. 0 – 800 rpm (, ¦, l » Shirts/Business max. 2.0 kg/2.0 kg Suitable for Shirts/Blouses made of cotton, linen, synthetics fibres or Ž...
Page 34
Overview of programmes Programme/Type of washing Options/Information Wool h max. 2.0 kg/ – Hand and machine-washable fabrics made of wool or wool blend; Ž (cold) – 40 °C particularly gentle wash programme to prevent shrinkage of laun- – – – –, 0 – 800 rpm dry, with longer programme breaks (soaking garments in the deter- gent solution).
Changing programme default settings Starching Changing programme default settings The laundry should not be Note: treated with fabric softener. Y ou can change the default settings for Liquid starch can be used in all wash C h a n g i n g p r o g r a m m e d e f a u l t s e t t i n g s selected programmes.
Changing programme default settings û(Finish in) & (Drying) 8:Define the Finish in time (end @: The drying function can be of programme). activated, deactivated and set with this button. Washing and drying without The respective programme Note: interruption is possible in automatic duration is displayed by selecting mode only.
Selecting additional functions Selecting additional functions Y ou can select your desired additional S e l e c t i n g a d d i t i o n a l f u n c t i o n s functions by touching the respective buttons.
Signal Signal S i g n a l Setting signal volume Activate setting mode for signal volume Turn to Off 1 step clock- Press I(Start/ 1 step clockwise Release wise Reload) and hold and a) Set volume for information signals Press theû(Finish Set to Off, setting mode for signal in) and set Volume...
Cleaning and maintenance Descaling Cleaning and Not required if detergent dosed maintenance correctly. However, if this does occur, follow the instructions of the descaling Warning agent manufacturer. Suitable descalers C l e a n i n g a n d m a i n t e n a n c e Risk of electric shock! can be purchased on our website or Danger of death if live parts are...
Cleaning and maintenance Drain pump blocked Warning Risk of scalding! When you wash at high temperatures, the water gets very hot. If you come into contact with the hot water, you may be scalded. Place the service flap back on, lock Allow the water to cool down.
Faults and what to do about them Filter in the water inlet hose Faults and what to do blocked about them Warning E mergency release, e.g. if a Danger of death! F a u l t s a n d w h a t t o d o a b o u t t h e m power failure occurs Do not immerse the Aqua-Stop safety device in water (it contains an electric...
Faults and what to do about them Information on the display panel Information Cause/Remedy Flashes fast + signal: The door was opened and the water level is too high. Õ ■ Close the door, continue the programme with I(Start/Reload) button or select Empty programme.
Page 44
Faults and what to do about them Faults Cause/Remedy Programme does not I(Start/Reload) or û(Finish in) selected? ■ start. Door closed? ■ Childproof lock active? Deactivate. ■ Detergent solution is not - - - - (Rinse stop = without final drain/spin) selected? ■...
Page 45
Faults and what to do about them Faults Cause/Remedy Fluff found on the washed Run the Fluff CleanŽ (cold) programme without laundry and detergent to laundry. remove fluff which have accumulated inside the drum during the previous dry- ing cycle. Water inlet noise during The washer dryer uses water condensation technology, water is constantly the drying phase.
Customer service Customer service Technical specifications I f you cannot correct the fault yourself, C u s t o m e r s e r v i c e see section, Faults and what to do D imensions: about them ~ Page 43 T e c h n i c a l s p e c i f i c a t i o n s 850 x 600 x 590 mm Please contact our customer service.
Consumption values Consumption values C o n s u m p t i o n v a l u e s Programme Option Load Energy Water Programme (kg) consumption * Consumption * duration * (kWh) (liter) (hours) Cottons 20 °C 0,30 Cottons 40 °C 1,08...
Page 48
01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.bsh-group.com *9001346124* 9001346124 (9904)