S (Prewash); Ý (Easy Iron); L (Rinse Plus); Z (Water Plus) - Siemens WD4HU541DN Instruction Manual And Installation Instructions

By selecting additional programme
settings, you can better adapt the
washing/drying process to your items of
laundry.
The settings can be selected or
deselected depending on the progress
of the programme.
The button indicator lamps light up if a
setting is activated.
The settings are not retained after the
appliance is switched off.
( Speed
Washing/drying in a shorter time while
achieving a washing/drying result that is
consistent with the normal performance.
Touch ( Speed to activate or
deactivate this additional programme
setting.
With the additional ( Speed
Note:
option activated, the maximum washing
load will be reduced, and extra cooling
water will be needed for the drying
process.

s (Prewash)

Prewash for heavily soiled laundry.
Touch s (Prewash) to activate or
deactivate it.
Put the detergent into dispenser I
Note:
and II.
Ý (Easy iron)
Reduces creasing by means of a
special spin sequence followed by
fluffing and reduced spin speed.
Touch Ý (Easy iron) and activate or
deactivate it.
If Ý (Easy iron) has been
Note:
activated, the laundry will have retained
a higher than average level of moisture
after spinning.
Additional programme settings

l (Rinse plus)

Additional rinse cycle depending on the
programme; longer programme length
for particularly sensitive skin and/or for
areas with very soft water.

z (Water plus)

Increased water level for gentler
treatment of the laundry.
Touch z (Water plus) to activate or
deactivate it.
â (Memory)
With memory you can save a selected
programme with your favourite settings.
To store:
Switch on the appliance.
1.
Select a programme.
2.
If required, change the programme
3.
default settings and/or select
programme additional settings.
Touch and hold â (Memory) button
4.
for approx. three seconds.
The programme is saved if all of the
settings flash briefly.
Calling up: touch â (Memory) button
briefly after you switch on the appliance.
Reset: touch and hold â (Memory)
button again for approx. three seconds
after selecting the new programme and
settings.
ç (Silent)
Function designed for noise reduction.
Washing and drying process noise will
be reduced, and ending signal will be
switched off.
If silent is selected for wash only,
Note:
remaining moisture of the laundry will
be slightly increased. The spin result
may not be satisfying. Before hanging
you can select 0 Spin programme to
further reduce moisture.
en
39