Page 2
Your new washer dryer Display rules : Warning! You have chosen a Siemens washer dryer. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
Intended use Cleaning and maintenance . . . 41 Intended use Appliance housing/control panel . . . 41 Drum ......41 This appliance is intended for private ■...
Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. T he following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■...
Safety instructions The mains plug and the Warning ■ protective contact socket Risk of poisoning! must match and the earthing Detergents and care products system must be correctly may result in poisoning if installed. consumed. The installation must have an If accidentally swallowed, seek ■...
Page 7
Safety instructions Warning Warning Risk of fire/material damage/ Risk of injury! damage to the appliance! The appliance is very heavy. ■ The use of extension cords or Lifting it may result in injury. power strips may result in fire Do not lift the appliance on due to overheating or short your own.
Safety instructions If the water hoses are altered Operation ■ or damaged, this may result Warning in material damage or Risk of explosions/fire! damage to the appliance. Laundry that has come into The water hoses must not be contact with solvents, oil, wax, kinked, crushed, altered or wax remover, paint, grease or severed.
Page 9
Safety instructions Certain objects may ignite Warning ■ when drying is in progress, Risk of poisoning! or even cause the appliance Poisonous fumes may be given to catch fire or explode. off by cleaning agents that Remove any lighters or contain solvents, e.g.
Safety instructions If you pour the wrong Warning ■ quantity of detergent or Eye/skin irritation! cleaning agent into the Detergent and care products appliance, this may result in may spray out if the detergent material damage or damage drawer is opened while the to the appliance.
Page 11
Safety instructions Repairs and any other work Warning ■ on the appliance must only Risk of injury/material be conducted by our damage/damage to the customer service or by an appliance! electrician. The same applies The use of spare parts and for replacing the mains cable accessories supplied by other (when necessary).
Environmental protection Sleep mode: If the appliance is not ■ Environmental operated for a prolonged period (approx. 5 minutes), the display protection panel lighting goes out before the programme starts and after the P ackaging/used appliance programme has ended, # flashes. E n v i r o n m e n t a l p r o t e c t i o n Touch any area of display panel to Dispose of packaging in an...
Positioning and connecting Mains lead Positioning and Bag: connecting Installation and operating ■ instructions S tandard accessories Customer Service location ■ P o s i t i o n i n g a n d c o n n e c t i n g directory* Check the appliance for transport Note:...
Positioning and connecting Safety instructions Installation on a base or a wooden joist floor Warning Risk of injury! Caution! The appliance is very heavy. Damage to the appliance ■ Be careful when lifting/transporting The appliance may "wander" and tip/ the appliance. topple from the base when spinning.
Page 15
Positioning and connecting To prevent transport damage from a) Remove the mains cable from the ■ occurring if the appliance is moved holders. at a later date, you must refit the transport locks before transporting the appliance. Keep the screws and sleeves in Note: a safe place.
Positioning and connecting Removing the support struts Hose and cable lengths Connection on left side Unscrew and remove all screws in the vertical transport struts. Remove the transport struts. ( ~ 145 cm 0 ~ 150 cm 8 ~ 95 cm @ 0 cm ~ 100 cm Connection on right side Undo and remove the screws on the...
Positioning and connecting Water inlet Connection Connect the water supply hose to Warning the water tap (¾" = 26.4 mm) and to Risk of death! the appliance: There is a risk of electric shock if you – Model: Standard touch live components. Do not immerse the Aqua-Stop safety valve* in water (it contains an electric valve).
Positioning and connecting Water outlet Connection Drainage into a siphon Warning ■ The connection point must be Risk of scalding! secured using a hose clamp with a When you are washing at high diameter of 24 - 40 mm (available temperatures, there is a risk of scalding from specialist dealers).
Positioning and connecting Alignment Electrical connection Level the appliance using a spirit level. Warning Incorrect levelling may result in intense Risk of death! noise, vibrations and "wandering". There is a risk of electric shock if you touch live components. Loosen the lock nuts using a Never touch or hold the mains plug ■...
Positioning and connecting Before washing for the first Transportation time e.g. when moving home The appliance was inspected Preparatory work: thoroughly before leaving the factory. To Turn off the water tap. remove any residual test water, run the Reduce the water pressure in the k Drum Clean programme the first supply hose.
Page 21
Positioning and connecting Insert all four sleeves. Before switching on the appliance again: Notes The support struts must be ■ removed. ~ Page 16 The transport braces must be ■ removed. ~ "Removing the transport locks" on page 14 Pour approx. 1 litre of water into ■...
Getting to know the appliance Getting to know the appliance A ppliance G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer Control panel Loading door Service flap...
Getting to know the appliance Control panel ( Programmes that can be selected. 0 Touch-Display 8 Start/Pause button Touch I button to start, interrupt (e.g. reload washing) and cancel the programme. @ Power button Press the # button to switch the appliance on/off.
Getting to know the appliance Touch-Display Additional programme settings Programme default settings Display Setting Wash+Dry Display Setting Description Ž - 90° Temperature Temperature that ¾ (Cupboard can be set in °C dry+) Ž = cold » (Cupboard dry) 2, 400- Spin speed Spin speed in rpm Ø...
Laundry Status indicators for the programme Laundry progress (programme sequence) P reparing laundry for washing L a u n d r y Protecting your laundry and appliance Caution! Damage to the appliance/textiles Foreign objects (e.g. coins, paper clips, needles, nails) may damage the washing or components of the appliance.
Laundry Preparing laundry for drying Sorting laundry Sort your laundry according to the care To ensure an even drying result, Note: instructions and manufacturer's sort the laundry according to the: information on the care labels, Type of fabric ■ depending on: Care symbols which are indicated on ■...
Overview of programmes Overview of programmes S electable programme O v e r v i e w o f p r o g r a m m e s Programme/Type of laundry Options/Information Name of the programme Max. load for washing/ Max.
Page 28
Overview of programmes Programme/Type of laundry Options/Information Y Delicates/Silk 2.0 kg/- For delicate, washable fabrics, e.g. made of silk, satin, synthetic Ž - 40 °C fibres or blends (e.g. silk blouses, silk scarves). 2 - 800 rpm ( Speed, ¦ Eco, z (Water plus), Ý...
Page 29
Overview of programmes Programme/Type of laundry Options/Information k Drum Clean 0.0 kg/0.0 kg Special programme for drum hygiene or fluff removal. Do not Ž, 40°C, 90 °C load any laundry. 1200 rpm 90°C = antibacterial programme. â (Memory), ç (Silent) 40°C = antibacterial programme, special drum cleaning deter- gent can be used.
Page 30
Overview of programmes Programme/Type of laundry Options/Information $ Shirts 2.0 kg/2.0 kg Non-iron shirts or blouses made of cotton, linen, synthetic fibres Ž - 60 °C or blended fabrics. 400 - 800 rpm ( Speed, ¦ Eco, z (Water plus), Ý...
Programme default settings To do this: Programme default Select a programme (except » myTime programme). settings The programme duration is displayed for the selected Y ou can change the default settings for programme, e.g. 2:30 P r o g r a m m e d e f a u l t s e t t i n g s selected programmes.
Additional programme settings ( Speed Additional programme Washing/drying in a shorter time while settings achieving a washing/drying result that is consistent with the normal performance. You can find possible additional N ote: A d d i t i o n a l p r o g r a m m e s e t t i n g s programme settings in the overview;...
Operating the appliance Ý (Easy iron) ç (Silent) Reduces creasing by means of a Function designed for noise reduction. special spin sequence followed by Washing and drying process noise will fluffing and reduced spin speed. be reduced, and ending signal will be switched off.
Operating the appliance Turn the water tap on. Placing laundry into the drum Insert the laundry. Close the door. Open the appliance door. Switching on the appliance/ Notes selecting a programme Unfold and load presorted items ■ of laundry. Mix large and small Press the # button till the indicator items.
Operating the appliance Dosing and adding detergent Filling the dispensers and care products Pull out the detergent drawer. Warning Caution! Eye / skin irritation! Damage to the appliance If the detergent drawer is opened Detergents and agents for the while the appliance is running, pretreatment of laundry (e.g.
Operating the appliance Starting the programme Measuring aid A* for liquid detergent *depending on the model Touch and hold I button for 1~2 seconds, then release the button. The Position the measuring aid A for programme starts and the appliance measuring the correct amount of liquid door is locked.
Operating the appliance When the programme ends, End Cancel the programme Note: is displayed. The door is locked. w 3 sec and Œ remain on to remind you to For programmes washing at high deactivate the childproof lock. temperatures: Touch the I button. To deactivate the childproof lock: To cool down laundry: Select Rinse.
Appliance settings Removing laundry/switching Appliance settings off the appliance A utomatic switch-off Press the # button till the indicator A p p l i a n c e s e t t i n g s lamp turns off, release the button. If the appliance is not operated for a The appliance is switched off.
Page 40
Appliance settings End signal Brightness You can select position 1 and use the Possible setting values: 1 - 4 ˜ button to adjust the volume of the You can select position 3 and use the end signal, e.g. ‘- „. ˜...
Sensors Appliance housing/control Sensors panel U nbalanced load detection Remove the detergent residue S e n s o r s ■ system immediately. Wipe the housing and the control ■ The automatic unbalanced load panel with a soft, damp cloth. detection system detects imbalances Do not use abrasive cloths, sponges ■...
Cleaning and maintenance To remove the insert: Push the insert Leave the detergent drawer open Note: upwards from below with your finger. so that any residual water can evaporate. Drain pump is blocked Turn the water tap off to prevent Note: more water from flowing in and to ensure that it is drained via the pump.
Cleaning and maintenance Carefully unscrew the pump cover; The drain hose at the siphon residual water may leak out. is blocked Clean the interior, pump cover thread and pump housing. The Press the # button. Pull out the impeller in the drain pump must be mains plug.
Faults and what to do about them Clean the filters: Faults and what to do Disconnect the hose from the rear of about them the appliance. E mergency release F a u l t s a n d w h a t t o d o a b o u t t h e m E.g.
Faults and what to do about them Press the # button. Pull out the Drain the water. ~ Page 42 mains plug. Pull the emergency release Open the service flap. downwards with a tool and release. The door can then be opened. Information on the display panel Display Cause/Remedy...
Faults and what to do about them Display Cause/Remedy H:32 The unbalanced load detection system has interrupted the spin cycle because the alternating with laundry is unevenly distributed. Distribute small and large items of laundry evenly in the drum. when programme is finished w 3 sec lights up The childproof lock is activated –...
Page 48
Faults and what to do about them Faults Cause/Remedy The programme is taking Not a fault – the unbalanced load detection system is adjusting an imbal- ■ longer than usual. ance by repeatedly distributing the laundry. Not a fault – the foam detection system is activated – a rinse cycle has ■...
Page 49
Faults and what to do about them Faults Cause/Remedy Drying duration extended. Run the k Drum Clean Ž (cold) programme to remove fluff which has ■ collected in the washer drum during the drying phase. If the ambient temperature is higher than 30 °C, this may extend the drying ■...
After-sales service After-sales service I f you cannot rectify a fault yourself, A f t e r - s a l e s s e r v i c e (~ "Faults and what to do about them" on page 44), please contact our after- sales service.
Consumption values Consumption values E nergy and water consumption, programme duration and residual moisture for C o n s u m p t i o n v a l u e s the main washing programme (approximate values) Programme Load Energy Water Programme...
Technical data Technical data Aqua-Stop warranty D imensions: O nly for appliances with Aqua-Stop T e c h n i c a l d a t a A q u a - S t o p w a r r a n t y 848 mm x 598 mm x 620 mm In addition to warranty claims against (height x width x depth)
Page 56
01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.bsh-group.com *9001327787* 9001327787 (0005)