Connecting To The Home Network And The Home Connect App - Siemens WD4HU541DN Instruction Manual And Installation Instructions

Connecting to the home
network and the Home
Connect app
Connect your appliance to the home
network automatically or manually
(you only need to do this the first time).
Notes
If your home network router has a
■
WPS function, you can connect the
appliance to your home network
automatically.
If your home network router does not
■
have a WPS function, you need to
connect the appliance to your home
network manually.
You must then connect to the Home
Connect app.
To connect your appliance to the
Note:
home network, Wi-Fi must be activated
on the appliance. Wi-Fi is deactivated
on the appliance by default and is
activated automatically when you
connect your appliance to your home
network.
Connecting to your home network
automatically
Step 2.1
Ensure that you are in the Home
Connect menu. ~ Page 46
Press I.
1.
The appliance now attempts to connect
to your home network. † flashes in the
display.
Activate the WPS function on your
2.
home network router within the next
2 minutes.
If the appliance has connected to your
home network successfully, Your home
appliance is connected to your home
network. ™©Ÿ and † appear in the
display and light up continuously.
If you are not able to establish a
Note:
connection, check whether your
appliance is within range of your home
network. Try connecting automatically
again or connect your appliance
manually.
Connecting to your home network
manually
Step 2.2
Ensure that you are in the Home
Connect menu. ~ Page 46
Make sure that you have opened the
Home Connect app and are logged in.
Set the programme to position 2.
1.
†'˜ (connect manually) appears in
the display.
Press I.
2.
The appliance now sets up its own Wi-Fi
network with the name (SSID)
HomeConnect.
Home Connect
en
47