Related Manuals for Siemens WD14H421GB
Summary of Contents for Siemens WD14H421GB
- Page 1 Washer dryer WD14H421GB siemens-home.com/welcome Register your product online ens-home.com/welcome...
-
Page 2: Your New Washer Dryer
Your new washer dryer Display rules : Warning! You have chosen a Siemens washer dryer. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries. -
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. -
Page 4: Intended Use
Intended use Customer service ... 35 Intended use Technical specifications ..35 For private domestic use only. ■ I n t e n d e d u s e The washer dryer is suitable for ■... -
Page 5: Safety Instructions
Safety instructions Warning Safety instructions Risk of scalding! When washing at high Electrical safety ■ S a f e t y i n s t r u c t i o n s temperatures, you may be Warning scalded if you touch the hot washing water (e.g. -
Page 6: Protection Of The Environment
Protection of the environment Warning Protection of the Risk of choking! environment When playing, children may become entangled in the Packaging/old appliance packaging/film and packaging P r o t e c t i o n o f t h e e n v i r o n m e n t parts or pull them over their heads and suffocate. -
Page 7: The Main Points In Brief
The main points in brief The main points in brief T h e m a i n p o i n t s i n b r i e f Plug into the mains. Open the washer Select the washing/ Max. -
Page 8: Getting To Know Your
Getting to know your appliance Getting to know your appliance Washer dryer G e t t i n g t o k n o w y o u r a p p l i a n c e 9S Open the door Hot air outlet 9T Close the door Operating/display panel... -
Page 9: Control Panel
Getting to know your appliance Control panel Change the default settings for the selected programme and select additional functions: ( Select a programme. Can be rotated in either 8 Select buttons Option and Select for direction. To switch off the washer dryer, set additional functions. -
Page 10: Display Panel
Getting to know your appliance Display panel Displays for the programme (: Temperature for washing Ž (cold) – 90° Temperature in °C programme 0: Spin speed for washing $ –1400 Spin speed in revolutions per minute; programme $ (Rinse stop = without final drain/spin cycle, laundry remains in the water after the last rinse cycle) See details ~ Page 26... - Page 11 Getting to know your appliance w flashes The childproof lock is actived, and if the pro- gramme selector has been adjusted or the buttons have been pressed Drying On if drying programme is selected è H: Programme information Time: Programme duration after programme 1:50* selection in h:min (hours:minutes) Finish in time in h (h=hour)
-
Page 12: Laundry
Laundry Symbols on the care labels ■ Laundry The numbers in the symbols Note: indicate the maximum washing P reparing laundry for washing temperature that may be used. L a u n d r y Suitable for normal washing Sorting laundry according to: process;... -
Page 13: Preparing Laundry For Drying
Laundry Empty any pockets. Remove any The following textiles must not be dried: ■ foreign objects. b = care symbol “Do not dry” ■ Wool or textiles containing wool. ■ Delicates (silk, synthetic curtains). ■ Textiles which contain foam rubber ■... -
Page 14: Operating The Appliance
Operating the appliance Selecting the programme/ Operating the Switching on the appliance appliance Note: Preparing the washer dryer If you have activated the childproof lock, O p e r a t i n g t h e a p p l i a n c e you must deactivate it before you can The washer dryer was tested before set a programme. -
Page 15: Adjusting The Washing Programme
Operating the appliance Adjusting the washing programme You can use the displayed default settings or adjust the selected programme optimally to the laundry items by changing the default settings or selecting additional functions. The Note: selectable settings and additional After changing the programme default functions depend on the selected settings and/or additional functions, the washing/drying programme. -
Page 16: Loading The Laundry
Operating the appliance Loading the laundry Dosing and adding detergent and care product Warning Danger of death! Caution! Laundry items pretreated with solvent- Damage to the appliance based detergents, e.g. stain remover/ Detergents and agents for the petroleum ether, may cause an pretreatment of laundry (e.g. -
Page 17: Starting The Programme
Operating the appliance Pour in detergent and/or cleaning Reinsert the drawer. product. Do not use the measuring aid for Note: gel detergents and washing powder, or Dispenser I Detergent for prewash. for programmes with prewash or when Dispenser i Softener, starch. Do not exceed "Finish in"... -
Page 18: Reloading The Laundry
Operating the appliance w lights up: The childproof lock is Changing the programme ■ activated. If you have started the wrong w flashes: The childproof lock is ■ programme by mistake, you can active and the programme selector change the programme as follows: has been adjusted. -
Page 19: End Of The Programme
Operating the appliance End of the programme After washing/drying – 0 – or – – – – (Rinse stop = without Open the door and remove the final drain/spin cycle) is indicated in the laundry. display and acoustic signal sounds. Turn the programme selector to Setting the signal ~ Page 27 $ Off. -
Page 20: Overview Of Programmes
Overview of programmes Overview of programmes Programme on the programme O v e r v i e w o f p r o g r a m m e s selector Programme/Type of washing Options/Information maximum load according to Name of the programme EN50229 Brief explanation of the programme and which textiles it is suitable for. - Page 21 Overview of programmes Programme/Type of washing Options/Information h Wool max. 2.0 kg Hand and machine-washable fabrics made of wool or wool blend; Ž (cold) – 40 °C particularly gentle wash programme to prevent shrinkage of laun- $ – 800 rpm dry, with longer programme breaks (soaking garments in the deter- –...
- Page 22 Overview of programmes Programme/Type of washing Options/Information Textile Guard max. 1.0 kg/1.0 kg Weatherproof and outdoor clothing with membrane coating and Ž (cold) – 40 °C water-resistant textiles. 400 – 800 rpm (, ¦, Ã, l Aut 1 max. 0.0 kg Fluff Clean Special program for drum hygiene or fluff removal.
-
Page 23: Drying Table
Overview of programmes Drying table Cottons/coloureds (textiles made of cotton or linen such as underwear, T-shirts, sweaters, trousers, kitchen towels) Dry weight in kg 0,5 1,0 1,0 2,0 2,0 3,0 3,0 4,0 Estimated drying time in min Adjustable drying time in min Cupboard dry Aut1 <... -
Page 24: Starching
Changing programme default settings Starching Changing programme default settings The laundry should not be Note: treated with fabric softener. You can change the default settings for Liquid starch can be used in all wash C h a n g i n g p r o g r a m m e d e f a u l t s e t t i n g s selected programmes. -
Page 25: Dry
Changing programme default settings Touch button Dry and activate the function Aut1 or Aut2. 8: The drying function can be Do not exceed the maximum loads activated, deactivated and set with this for drying. button. Washing and drying without Overview of programmes interruption is possible in automatic ~ Page 20 mode only. -
Page 26: Selecting Additional
Selecting additional functions z (Water Plus) Selecting additional Increased water level and extended functions wash time. For areas with very soft water or for further enhancing the Select the desired additional functions washing result. S e l e c t i n g a d d i t i o n a l f u n c t i o n s Option button, keep on touching the button until the indicator light of your l (Rinse plus) -
Page 27: Setting The Signal
Setting the signal Setting the signal S e t t i n g t h e s i g n a l 1. Activate setting mode for the signal volume Turn to $ Off. Turn one position Press and hold Temp. button + Release the button, clockwise. -
Page 28: Cleaning And Maintenance
Cleaning and maintenance Drum Cleaning and Use chlorine-free cleaning agents, do maintenance not use steel wool. Warning C l e a n i n g a n d m a i n t e n a n c e Descaling Risk of electric shock! Danger of death if live parts are Not required if detergent dosed... -
Page 29: Drain Pump Blocked
Cleaning and maintenance Drain pump blocked Reinsert and screw on the pump cover. Handle should be vertical. Warning Risk of scalding! Washing water is hot when washing at high temperatures. You may be scalded if you touch the hot washing water. Allow the washing water to cool down. -
Page 30: Filter In The Water Inlet Hose Blocked
Cleaning and maintenance Filter in the water inlet hose Air filter blocked blocked Turn the programme selector to $ Off. Pull out the mains plug. Warning Open and remove the service flap. Danger of death! Take out the air filter. Do not immerse the Aqua-Stop safety device in water (it contains an electric valve). -
Page 31: Faults And What To Do About Them
Faults and what to do about them Caution! Faults and what to do Water damage about them Leaking water may cause damage. Do not open the door if you can still see Emergency release, e.g. if a water through the glass. F a u l t s a n d w h a t t o d o a b o u t t h e m power failure occurs Turn the programme selector to... -
Page 32: Faults And What To Do About Them
Faults and what to do about them Display Cause/Remedy Flashes (no water supply): Tap turned on? Water inlet filter blocked? Clean ■ the water inlet filter. ~ Page 30 Water hose kinked or blocked? Lights up (low water pressure): For information only. This will not affect the ■... - Page 33 Faults and what to do about them Faults Cause/Remedy Spin cycle activated sev- Not a fault – unbalanced load detection system adjusts imbalance. eral times. Residual water in the dis- Not a fault – effect of the care product not impaired. ■...
- Page 34 Faults and what to do about them Faults Cause/Remedy Drying duration extended. According to the air cooling principle, a higher ambient temperature will ■ result in poor drying performance, so the drying time will be extended. Ensure good ventilation to allow surplus heat to escape. Air filter blocked? Clean the air filter ~ Page 30 ■...
-
Page 35: Customer Service
Customer service Customer service Technical specifications If you cannot correct the fault yourself, C u s t o m e r s e r v i c e see section, Faults and what to do about them ~ Page 32, please contact T e c h n i c a l s p e c i f i c a t i o n s Dimensions 60 x 59 x 84,5 cm... -
Page 36: Consumption Values
Consumption values Consumption values C o n s u m p t i o n v a l u e s Programme Option Load Energy Water Programme (kg) consumption *** Consumption *** duration *** (kWh) (liter) (hours) Cottons 20 °C * 0,23 2 ¾... -
Page 37: Installation And Connection
Installation and connection 8 Water supply hose on Aqua-Stop Installation and models connection @ Water drain hose H Elbow for securing the water Standard accessories drain hose* I n s t a l l a t i o n a n d c o n n e c t i o n P Water supply hose on standard/ Check the washer dryer for Note:... -
Page 38: Installation Area
Installation and connection Installing the appliance under/ Caution! Damage to the appliance between kitchen units Frozen hoses may tear or burst. ■ Do not install the washer dryer Warning outdoors and/or in an area where Risk of electric shock! there is a risk of frost. Danger of death if live parts are When lifting the washer dryer by its touched. -
Page 39: Removing The Transportation Protection Devices
Installation and connection Removing the transportation Take the power cord out of the holders. Remove the sleeves. protection devices Caution! Damage to the appliance Before using the washer dryer for the ■ first time, it is essential to remove all 4 transportation protection devices. -
Page 40: Connecting The Water
Installation and connection If the hose holders are used, the Water supply Note: possible hose lengths are reduced! Notes Available from dealer/customer Do not kink, crush, alter or cut ■ service: through the water supply hose Extension for Aqua-Stop or cold ■... -
Page 41: Water Drainage
Installation and connection Carefully turn on the tap and check Caution! that the connection points are not Damage to appliance/textiles leaking. If the end of the drainage hose is immersed in the drained water, water may be drawn back into the appliance and damage the washer dryer and/or textiles. -
Page 42: Drainage Into A Plastic Pipe With Rubber Sleeve Or Into A Gully
Installation and connection Drainage into a plastic pipe Electrical connection with rubber sleeve or into Electrical safety a gully Warning Connecting Risk of electric shock! Danger of death if live parts are touched. When disconnecting the main plug, ■ always pull the plug itself and not the cable, otherwise the cable could be damaged. -
Page 43: Before Washing/Drying For
Installation and connection Before washing/drying for the Transportation first time Preparatory work Turn off the tap. The washer dryer was inspected Release the water pressure in the thoroughly before leaving the factory. To supply hose. remove any residual test water, run the Filter in the water inlet hose blocked Fluff Clean 40°C programme the first ~ Page 30... - Page 44 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.com *9000907639* 9000907639 (9507)