Page 2
Your new washer dryer Display rules : Warning! You have chosen a Siemens washer dryer. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
Intended use Customer service ... 35 Intended use Technical specifications ..35 For private domestic use only. ■ I n t e n d e d u s e The washer dryer is suitable for ■...
Safety instructions Warning Safety instructions Risk of scalding! When washing at high Electrical safety ■ temperatures, you may be S a f e t y i n s t r u c t i o n s Warning scalded if you touch the hot Danger of death! washing water (e.g.
Protection of the environment Warning Protection of the Risk of choking! environment When playing, children may become entangled in the Packaging/old appliance packaging/film and packaging P r o t e c t i o n o f t h e e n v i r o n m e n t parts or pull them over their heads and suffocate.
The main points in brief The main points in brief T h e m a i n p o i n t s i n b r i e f Insert mains plug. Open the door. Select the washing/ Programme Turn the tap on.
Getting to know your appliance Getting to know your appliance Washer dryer G e t t i n g t o k n o w y o u r a p p l i a n c e 9T Close the door Hot air outlet Service flap and cool air Control panel...
Getting to know your appliance Control panel Change the default settings for the selected H Start the wash programme. Select the inicio/ programme and select additional functions: pausa+carga (Start/Reload) ! button to start, interrupt (e.g. reload laundry) and cancel ( Select a programme. The programme selector the programme.
Getting to know your appliance Display panel Displays for the selected programme Prewash Washing Rinse Drain/Spin Drying Š Cooling down, rotating during drying phase § Progress bar | lights up Water pressure too low. This extends the pro- gramme duration. | flashes The tap has not been turned on or there is no water pressure.
Page 11
Getting to know your appliance Displays for the selected programme – – – -1500 Spin speed in revolutions per minute; – – – (Rinse stop = without final drain/spin cycle, laundry remains in the water after the last rinse cycle). –...
Laundry Symbols on the care labels ■ Laundry The numbers in the symbols Note: indicate the maximum washing P reparing laundry for washing temperature that may be used. L a u n d r y Sorting laundry according to: Suitable for normal washing process;...
Laundry Empty any pockets. Remove any The following textiles must not be dried: ■ foreign objects. b = care symbol “Do not dry” ■ Wool or textiles containing wool. ■ Delicates (silk, synthetic curtains). ■ Textiles which contain foam rubber ■...
Operating the appliance Open the door. Operating the appliance Preparing the washer dryer O p e r a t i n g t h e a p p l i a n c e The washer dryer was tested before delivery.
Operating the appliance Adjusting the washing Changing additional functions of a washing programme: programme Touch the menu (Option) and You can use the displayed default modificar (Select) buttons to set settings or adjust the selected desired additional functions as required. programme optimally to the laundry items by changing the default settings or selecting additional functions.
Operating the appliance Loading the laundry Dosing and adding detergent and care product Warning Danger of death! Caution! Laundry items pretreated with solvent- Damage to the appliance based detergents, e.g. stain remover/ Detergents and agents for the petroleum ether, may cause an pretreatment of laundry (e.g.
Operating the appliance Pour in detergent and/or cleaning Reinsert the drawer. product. Do not use the measuring aid for Note: gel detergents and washing powder, or Dispenser I Detergent for prewash. for programmes with prewash or when Dispenser i Softener, starch. Do not exceed "Finish in"...
Operating the appliance w lights up: The childproof lock is Changing the programme ■ activated. If you have started the wrong w flashes: The childproof lock is ■ programme by mistake, you can active and the programme selector change the programme as follows: has been adjusted.
Operating the appliance End of the programme After washing/drying – 0 – or – – – – is indicated in the Open the door and remove the display and acoustic signal sounds. laundry. Setting the signal ~ Page 27 Turn the programme selector to $ (Off).
Overview of programmes Overview of programmes Programme on the programme O v e r v i e w o f p r o g r a m m e s selector Programme/Type of laundry Options/Information Name of the programme maximum load according to EN50229 Brief explanation of the programme and which textiles it is suitable for.
Page 21
Overview of programmes Programme/Type of laundry Options/Information delicado/seda (Delicates/Silk) max. 2,0 kg For delicate, washable textiles, e.g.made of silk, satin, synthetic cold – 40°C fibres or blended fabrics. - - - - 800 rpm Use a detergent suitable for machine washable delicate fab- Note: Stains, á, {, l rics or silk.
Page 22
Overview of programmes Programme/Type of laundry Options/Information retirar pelusas/fios (Fluff Clean) 0,0 kg Special program for drum hygiene or fluff removal. cold, 40°C, 90°C 90 °C = antibacterial program; do not use detergent. 400 - 1400 rpm 40 °C = antibacterial program, special drum cleaning detergent can –...
Overview of programmes Drying table Cottons/coloureds (textiles made of cotton or linen such as underwear, T-shirts, sweaters, trousers, kitchen towels) Dry weight in kg 0,5 1,0 1,0 2,0 2,0 3,0 3,0 4,0 Estimated drying time in min Adjustable drying time in min »...
Changing programme default settings Starching Changing programme default settings The laundry should not be Note: treated with fabric softener. You can change the default settings for Liquid starch can be used in all wash C h a n g i n g p r o g r a m m e d e f a u l t s e t t i n g s selected programmes.
Changing programme default settings 0 (Finish in) Note: Programme selection in secar normal 8 Define the Finish in time (Intensive Dry) or secar delicado (Low (end of programme). Heat Dry) position to select individual drying programme. The respective programme Note: Overview of programmes ~ Page 20 duration is displayed by selecting the programme.
Selecting additional functions ecoPerfect à Selecting additional 0 Energy-optimised washing by functions reducing the temperature while achieving a consistent washing result. Select the desired additional function S e l e c t i n g a d d i t i o n a l f u n c t i o n s with the menu (Option) button, touch The washing temperature is Note:...
Setting the signal Setting the signal S e t t i n g t h e s i g n a l 1. Activate setting mode for the signal volume Turn to $ (Off). Turn one position Touch and hold the temp. °C (Tem- Release the button, clockwise.
Cleaning and maintenance Drum Cleaning and Use chlorine-free cleaning agents, do maintenance not use steel wool. Warning Descaling C l e a n i n g a n d m a i n t e n a n c e Risk of electric shock! Danger of death if live parts are Not required if detergent dosed...
Cleaning and maintenance Drain pump blocked To prevent unused detergent Note: from flowing into the outlet during the next wash: Pour 1 litre of water into Warning dispenser II and start the 0 (Spin)/ Risk of scalding! p (Empty) programme. Washing water is hot when washing at high temperatures.
Cleaning and maintenance Clean the filter on the tap: Air filter blocked Disconnect the hose from the water tap. Turn the programme selector to Clean the filter with a small brush. $ (Off). Pull out the mains plug. Open and remove the service flap. Take out the air filter.
Faults and what to do about them Faults and what to do about them Emergency release, e.g. if a F a u l t s a n d w h a t t o d o a b o u t t h e m power failure occurs The programme continues running when the power supply is restored.
Faults and what to do about them Information on the display panel Display Cause/Remedy A:01 Close the door immediately because of the rising water level. If an interruption occurs, A:01 and OPEN are displayed alternately. The door is locked for safety reasons (water level and/or temperature too high). A:02 Washing programme: In pause mode, A:02 and PAUS are displayed ■...
Faults and what to do about them Faults and what to do about them Faults Cause/Remedy Water is running out. Correctly attach/replace drainage hose. ■ Tighten the screw connection of the supply hose. ■ No water supply. inicio/pausa+carga (Start/Reload) ! not selected? ■...
Page 34
Faults and what to do about them Faults Cause/Remedy Programme sequence Not a fault – unbalanced load detection system adjusts imbalance. ■ longer than usual. Not a fault – foam detection function active. Additional rinse cycle. ■ Detergent residues on the Occasionally phosphate-free detergents contain water-insoluble residues.
Customer service Customer service Technical specifications If you cannot correct the fault yourself, C u s t o m e r s e r v i c e see section, Faults and what to do about them ~ Page 33 T e c h n i c a l s p e c i f i c a t i o n s Dimensions 60 x 59 x 84,5 cm...
Consumption values Consumption values C o n s u m p t i o n v a l u e s Programme Energy Water Programme Option Load (kg) consumption Consumption duration *** *** (kWh) *** (Liter) (hours) algodón/algodão (Cottons) 7,0 kg 0.23 kWh 73 l 2 ¾...
Installation and connection @ Water drain hose Installation and H Elbow for securing the water connection drain hose* P Water supply hose on standard/ Aqua-Secure models Standard accessories I n s t a l l a t i o n a n d c o n n e c t i o n depending on the model Check the machine for transport Note:...
Installation and connection When lifting the washer dryer by its Do not remove the appliance cover. ■ projecting parts (e.g. washer dryer Build under/build in before connection door), the parts may break off and to the power supply. cause injuries. Warning Do not lift the washer dryer by its Risk of scalding!
Installation and connection Removing the transportation protection devices Caution! Damage to the appliance Before using the washer dryer for the ■ first time, it is essential to remove all Insert the covers. Lock firmly by 4 transportation protection devices. pressing on the locking hook. Insert Keep the transportation protection the hose holder.
Installation and connection If the hose holders are used, the Water supply Note: possible hose lengths are reduced! Notes Available from dealer/customer Do not kink, crush, alter or cut ■ service: through the water supply hose Extension for Aqua-Stop or cold ■...
Installation and connection Carefully turn on the tap and check Ensure that: that the connection points are not the sealing plug does not block the ■ leaking. outflow of the washbasin. the water drains quickly enough. ■ the end of the drainage hose is not ■...
Installation and connection Alignment Electrical connection Loosen the lock nut in a clockwise Electrical safety direction with a wrench. Check the alignment of the washer Warning dryer with a spirit level and, if Risk of electric shock! required, correct. Adjust the height Danger of death if live parts are by rotating the appliance foot.
Installation and connection Before washing/drying for the Transportation first time Preparatory work Turn off the tap. The washer dryer was inspected Release the water pressure in the thoroughly before leaving the factory. To supply hose. remove any residual test water, run the Filter in the water inlet hose blocked retirar pelusas/fios (Fluff Clean) ~ Page 29...
Page 44
01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.bsh-group.com *9001039612* 9001039612 (9611)