Related Manuals for Siemens WD14U560TR
Summary of Contents for Siemens WD14U560TR
- Page 1 Washer dryer WD14U560TR siemens-home.bsh-group.com/welcome Register your product online...
- Page 2 Your new washer dryer Display rules : Warning! You have chosen a Siemens washer dryer. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
-
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Drying table . -
Page 4: Intended Use
Intended use Cleaning and maintenance . . . 42 Intended use Appliance housing/control panel . . . 42 Drum ......42 This appliance is intended for private ■... -
Page 5: Safety Instructions
Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. T he following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■... -
Page 6: Installation
Safety instructions The mains plug and the Warning ■ protective contact socket Risk of poisoning! must match and the earthing Detergents and care products system must be correctly may result in poisoning if installed. consumed. The installation must have an If accidentally swallowed, seek ■... - Page 7 Safety instructions Warning Warning Risk of fire/material damage/ Risk of injury! damage to the appliance! The appliance is very heavy. ■ The use of extension cords or Lifting it may result in injury. power strips may result in fire Do not lift the appliance on due to overheating or short your own.
-
Page 8: Operation
Safety instructions If the water hoses are altered Operation ■ or damaged, this may result Warning in material damage or Risk of explosions/fire! damage to the appliance. Laundry that has come into The water hoses must not be contact with solvents, oil, wax, kinked, crushed, altered or wax remover, paint, grease or severed. - Page 9 Safety instructions Certain objects may ignite Warning ■ when drying is in progress, Risk of poisoning! or even cause the appliance Poisonous fumes may be given to catch fire or explode. off by cleaning agents that Remove any lighters or contain solvents, e.g.
-
Page 10: Cleaning/Maintenance
Safety instructions If you pour the wrong Warning ■ quantity of detergent or Eye/skin irritation! cleaning agent into the Detergent and care products appliance, this may result in may spray out if the detergent material damage or damage drawer is opened while the to the appliance. - Page 11 Safety instructions Repairs and any other work Warning ■ on the appliance must only Risk of injury/material be conducted by our damage/damage to the customer service or by an appliance! electrician. The same applies The use of spare parts and for replacing the mains cable accessories supplied by other (when necessary).
-
Page 12: Environmental Protection
Environmental protection Tips on economical use Environmental protection Always fill the appliance with the ■ maximum amount of laundry for each programme. ~ Page 28 P ackaging/used appliance Wash normally soiled laundry E n v i r o n m e n t a l p r o t e c t i o n ■... -
Page 13: Positioning And Connecting
Positioning and connecting Mains lead Positioning and Bag: connecting Installation and operating ■ instructions S tandard accessories Customer Service location ■ P o s i t i o n i n g a n d c o n n e c t i n g directory* Check the appliance for transport Note:... -
Page 14: Safety Instructions
Positioning and connecting Safety instructions Installation surface The appliance must be stable Warning Note: aligned so that it does not move Risk of injury! around. The appliance is very heavy. ■ The installation surface must be firm Be careful when lifting/transporting ■... -
Page 15: Removing The Transport Locks
Positioning and connecting Removing the transport locks Unscrew and remove all four transport brace screws. Caution! Damage to the appliance The appliance is secured for ■ transportation using transport locks. If the transport locks are not removed, the appliance may become damaged when it is operated. -
Page 16: Removing The Support Struts
Positioning and connecting Lock the covers firmly in place by Remove the transport strut. applying pressure to the snap-in hooks. Hose and cable lengths Connection on left side Removing the support struts Unscrew and remove all screws in the vertical transport struts. ( ~ 105 cm 0 ~ 150 cm Remove the transport struts. -
Page 17: Water Inlet
Positioning and connecting If the supply hose is too short for Note: Connection your connection, you can order an Connect the water supply hose to extension from the after-sales service. the water tap (¾" = 26.4 mm) and to the appliance: Water inlet –... -
Page 18: Water Outlet
Positioning and connecting Open the water tap carefully, Connection checking the leak tightness of the Drainage into a washbasin connection points. The screw ■ Secure the outlet hose so that it connection is under mains water cannot slip out. pressure. Elbow available from after-sales service: Water outlet... -
Page 19: Alignment
Positioning and connecting Alignment Electrical connection Level the appliance using a spirit level. Warning Incorrect levelling may result in intense Risk of death! noise, vibrations and "wandering". There is a risk of electric shock if you touch live components. Loosen the lock nuts using a Never touch or hold the mains plug ■... -
Page 20: Before Washing For The First Time
Positioning and connecting Before washing for the first Transportation time e.g. when moving home The appliance was inspected Preparatory work: thoroughly before leaving the factory. To Turn off the water tap. remove any residual test water, run the Reduce the water pressure in the Tambur bakım (Drum Clean) supply hose. - Page 21 Positioning and connecting Insert all four sleeves. Before switching on the appliance again: Notes The support struts must be ■ removed. The transport braces must be ■ removed. ~ "Removing the transport locks" on page 15 Pour approx. 1 litre of water into ■...
-
Page 22: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance A ppliance G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer Control panel Loading door Service flap... -
Page 23: Control Panel
Getting to know the appliance Control panel ( Programmes that can be selected. 0 Touch-Display 8 Start/Pause button Touch I button to start, interrupt (e.g. reload washing) and cancel the programme. @ Power button Press the # button to switch the appliance on/off. -
Page 24: Touch-Display
Getting to know the appliance Touch-Display Additional programme settings Programme default settings Display Setting Wash+Dry Display Setting Description Temperature Temperature that Ž - 90° can be set in °C ¾ (Cupboard dry+) Ž = cold » (Cupboard dry) Spin speed Spin speed in rpm Ø... -
Page 25: Laundry
Laundry Status indicators for the programme Laundry progress (programme sequence) P reparing laundry for washing L a u n d r y Protecting your laundry and appliance Caution! Damage to the appliance/textiles Foreign objects (e.g. coins, paper clips, needles, nails) may damage the washing or components of the appliance. -
Page 26: Preparing Laundry For Drying
Laundry Preparing laundry for drying Sorting laundry Sort your laundry according to the care To ensure an even drying result, Note: instructions and manufacturer's sort the laundry according to the: information on the care labels, Type of fabric ■ depending on: Care symbols which are indicated on ■... -
Page 27: Starching
Laundry Starching Laundry should not be treated Note: with fabric softener. Switch on the appliance. Select the Durulama(Rinse) programme. Measure starch into i in accordance with the manufacturer's instructions (clean first if necessary). Touch the I button. Dyeing/bleaching Dye should only be used in normal household quantities. -
Page 28: Overview Of Programmes
Overview of programmes Overview of programmes S electable programme O v e r v i e w o f p r o g r a m m e s Programme/Type of laundry Options/Information Name of the programme Max. load for washing/ Max. - Page 29 Overview of programmes Programme/Type of laundry Options/Information Narin/İpek (Delicates/Silk) 2.0 kg/- For delicate, washable fabrics, e.g. made of silk, satin, synthetic Ž - 40 °C fibres or blends (e.g. silk blouses, silk scarves). 2 - 800 rpm ( Speed, ¦ Eco, z (Water plus), Ý...
- Page 30 Overview of programmes Programme/Type of laundry Options/Information Tambur bakım (Drum Clean) 0.0 kg/0.0 kg Special programme for drum hygiene or fluff removal. Do not Ž, 40°C, 90 °C load any laundry. 1200 rpm 90°C = antibacterial programme. 40°C = antibacterial programme, special drum cleaning deter- â...
- Page 31 Overview of programmes Programme/Type of laundry Options/Information Gömlek/Bluz (Shirts) 2.0 kg/2.0 kg Non-iron shirts or blouses made of cotton, linen, synthetic fibres Ž - 60 °C or blended fabrics. 400 - 800 rpm ( Speed, ¦ Eco, z (Water plus), Ý...
-
Page 32: Drying Table
Overview of programmes Drying table Estimated drying time (min) Recommended drying Option Drying load » (Cupboard ¾ (Cup- Ø programme (kg) (Iron dry) dry) board dry+) 1.0-2.0 40-50 50-70 65-90 ( Speed 2.0-4.0 50-75 70-95 90-135 Pamuklular (Cottons)/ 4.0-6.0 75-90 95-120 135-160 Haνlu(Towels)/Hijyen... -
Page 33: Programme Default Settings
Programme default settings To do this: Programme default Select a programme (except myTime programme). settings The programme duration is displayed for the selected Y ou can change the default settings for programme, e.g. 2:30 P r o g r a m m e d e f a u l t s e t t i n g s selected programmes. -
Page 34: Additional Programme Settings34
Additional programme settings ( Speed Additional programme Washing/drying in a shorter time while settings achieving a washing/drying result that is consistent with the normal performance. You can find possible additional N ote: A d d i t i o n a l p r o g r a m m e s e t t i n g s programme settings in the overview;... -
Page 35: Ý (Easy Iron)
Operating the appliance Ý (Easy iron) ç (Silent) Reduces creasing by means of a Function designed for noise reduction. special spin sequence followed by Washing and drying process noise will fluffing and reduced spin speed. be reduced, and ending signal will be switched off. -
Page 36: Switching On The Appliance/ Selecting A Programme
Operating the appliance Turn the water tap on. Placing laundry into the drum Insert the laundry. Close the door. Open the appliance door. Switching on the appliance/ Notes selecting a programme Unfold and load presorted items ■ of laundry. Mix large and small Press the # button till the indicator items. -
Page 37: Dosing And Adding Detergent And Care Products
Operating the appliance Dosing and adding detergent Pour in detergent and/or cleaning product. and care products Caution! Damage to the appliance Detergents and agents for the pretreatment of laundry (e.g. stain remover, prewash sprays, etc.) may damage the surfaces of the appliance. Keep these agents away from the surfaces of the appliance. -
Page 38: Starting The Programme
Operating the appliance Starting the programme Measuring aid A* for liquid detergent *depending on the model Touch and hold I button for 1~2 seconds, then release the button. The Position the measuring aid A for programme starts and the appliance measuring the correct amount of liquid door is locked. -
Page 39: Adding/Removing Laundry
Operating the appliance When the programme ends, End Cancel the programme Note: is displayed. The door is locked. w 3 sec and Πremain on to remind you to For programmes washing at high deactivate the childproof lock. temperatures: Touch the I button. To deactivate the childproof lock: To cool down laundry: Select Touch and hold the w 3 sec button... -
Page 40: Removing Laundry/Switching Off The Appliance
Appliance settings Removing laundry/switching Appliance settings off the appliance A utomatic switch-off Press the # button till the indicator A p p l i a n c e s e t t i n g s lamp turns off, release the button. If the appliance is not operated for a The appliance is switched off. - Page 41 Appliance settings End signal Brightness You can select position 1 and use the ˜ Possible setting values: 1 - 4 button to adjust the volume of the end You can select position 3 and use the ˜ signal, e.g. ‘- „. button to adjust the brightness of the Touch-Display, e.g.
-
Page 42: Sensors
Sensors Appliance housing/control Sensors panel U nbalanced load detection Remove the detergent residue S e n s o r s ■ system immediately. Wipe the housing and the control ■ The automatic unbalanced load panel with a soft, damp cloth. detection system detects imbalances Do not use abrasive cloths, sponges ■... -
Page 43: Emptying The Detergent Draw, Cleaning The Detergent Drawer And Its Housing
Cleaning and maintenance Emptying the detergent draw, Fit the insert and lock it in place (push the cylinder onto the guide cleaning the detergent drawer pin). and its housing If the appliance contains detergent or fabric softener residues: Pull out the detergent drawer. Press down the insert and fully remove the drawer. - Page 44 Cleaning and maintenance Press the # button. Pull out the Refit and screw on the pump cover. mains plug. The handle must be in a vertical Open the service flap. position. Take the drain hose out of the Close the service flap. retainer.
-
Page 45: The Drain Hose At The Siphon Is Blocked
Cleaning and maintenance The drain hose at the siphon Clean the filters: is blocked Disconnect the hose from the rear of the appliance. Press the # button. Pull out the mains plug. Loosen the hose clamp. Carefully remove the drain hose; residual water may leak out. -
Page 46: Faults And What To Do About Them
Faults and what to do about them Press the # button. Pull out the Faults and what to do mains plug. Open the service flap. about them E mergency release F a u l t s a n d w h a t t o d o a b o u t t h e m E.g. -
Page 47: Information On The Display Panel
Faults and what to do about them Information on the display panel Display Cause/Remedy Flashes fast + signal: The door was opened and the water level is too high. Œ ■ Close the door, continue the programme with I button or select Boşaltma (Drain) programme. -
Page 48: Faults And What To Do About Them
Faults and what to do about them Display Cause/Remedy The indicator lamp of Run the Tambur bakım (Drum Clean) 90°C programme to clean and care for the the Tambur bakım drum and the outer tub. (Drum Clean) pro- Notes gramme flashes Run the programme without laundry. - Page 49 Faults and what to do about them Faults Cause/Remedy The programme will not Have you touched the I button or selected f (Finish in) time? ■ start. Is the door closed? ■ Childproof lock activated? Deactivate childproof lock. ■ Shop mode activated? If the display shows àœ©˜ for 5 s after you have ■...
- Page 50 Faults and what to do about them Faults Cause/Remedy The programme is taking Not a fault – the unbalanced load detection system is adjusting an imbal- ■ longer than usual. ance by repeatedly distributing the laundry. Not a fault – the foam detection system is activated – a rinse cycle has ■...
- Page 51 Faults and what to do about them Faults Cause/Remedy Drying duration extended. Run the Tambur bakım (Drum Clean) Ž (cold) programme to remove ■ fluff which has collected in the washer drum during the drying phase. If the ambient temperature is higher than 30 °C, this may extend the drying ■...
-
Page 52: After-Sales Service
After-sales service After-sales service I f you cannot rectify a fault yourself, A f t e r - s a l e s s e r v i c e (~ "Faults and what to do about them" on page 46), please contact our after- sales service. -
Page 53: Consumption Values
Consumption values Consumption values E nergy and water consumption, programme duration and residual moisture for C o n s u m p t i o n v a l u e s the main washing programme (approximate values) Programme Load Energy Water Programme... -
Page 54: Technical Data
Technical data Technical data D imensions: T e c h n i c a l d a t a 848 mm x 598 mm x 620 mm (height x width x depth) Weight: 84 kg Mains connection: Nominal voltage 220-240V, 50 Hz Minimum installation protection (c)10 Nominal power 1900-2300 W Water pressure:... -
Page 55: Aqua-Stop Warranty
Aqua-Stop warranty Aqua-Stop warranty O nly for appliances with Aqua-Stop A q u a - S t o p w a r r a n t y In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty, we will provide compensation under the following conditions: If water damage is caused due to a... - Page 56 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.bsh-group.com *9001434025* 9001434025 (0006)