Prewash; Easy Iron; Variospeed; Operating The Appliance - Siemens WN44A2X0GC Instruction Manual And Installation Instructions

Table of Contents

Advertisement

Prewash

Prewash for heavily soiled laundry.
Touch Prewash to activate or
deactivate it.
Put the detergent into dispenser I
Note:
and II.

Easy iron

A special operation using reduced spin
speed followed by fluffing to help
reduce creasing.
Touch Easy iron to activate or
deactivate it.
If Easy iron has been activated,
Note:
the laundry will have retained a higher
than average level of moisture after
spinning.

varioSpeed (

Washing in a shorter time while
achieving a washing result that is
consistent with the normal performance.
Touch varioSpeed ( to activate or
deactivate this additional programme
setting.
With the varioSpeed (
Note:
additional programme setting activated,
the maximum load of washing will be
reduced, and extra water will be needed
for the washing process.

Operating the appliance

1
Operating the
appliance
P reparing the appliance
O p e r a t i n g t h e a p p l i a n c e
The appliance was tested before
delivery. To remove residual water from
the test procedure, the first wash cycle
should be run without laundry using the
Cottons 90°C programme.
~ "Before washing for the first time"
on page 21
Notes
Never switch on a damaged
appliance!
Inform customer service!
Insert mains plug.
1.
:
Warning
Risk of death from electric shock!
Risk of death if live parts are
touched.
– Never pull out the mains plug by
tugging the power cord.
– Insert/pull out the mains plug
with dry hands only.
Turn the water tap on.
2.
Open the appliance door.
3.
en
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wn44a2xsgc

Table of Contents