E. MOUNTING ATN NVM-14 ON TO ATN 3.5X26
SCOpE
There is a special adapter for using the ATN NVM-14 with the
ATN 3.5x26 riflescope.
To mount the ATN NVM-14 perform the following:
1. Loosen the the mounting screw (A) of adapter.
2. Mount the adapter onto Picatinny rail of the ATN 3.5x26 rif-
lescope.
3. Tighten the mounting screw of adapter.
4. Loosen the screw (B) of adapter. Push the button (C) and
insert the bracket of the NVM-14 into the rail of the adapter.
5. Tighten the screw (B).
C
B
A
Figure 3-5
Adapter for using ATN 3.5x26 scope
F. MOUNTING THE pICATINNY AdApTER TO THE
ATN NVM-14
Mount Picatinny adapter(A) onto one of the rails on the monocu-
lar. Tighten two fixing screws(B) of the adapter.
A
B
Figure 3-6
Mounting the picatinny Adapter to the ATN NVM-14
3-6