Attaching Atn Nvm-14 To Helmet Mount - ATN NVM-14-3 Operator's Manual

B. MOUNTING THE ATN NVM-14 TO A HELMET
Attachment of ATN NVM-14 to a standard PASGT helmet. The
Helmet mount fits securely onto helmet via a rugged strapping
device and grooved hooks. With helmet mount, the NVM-14 can
be positioned directly in front of user's eyes or flipped up out of
viewing position.
1. Install the mount onto helmet as shown on the picture.
2. Tighten and fixate the straps (A)
3. Attach the monocular to the rail.
4. Loosen screw (C). Push button (B) and insert the bracket of the
NVM-14 into rail (D) of the helmet mount.
5. Place the helmet with NVM-14 onto head.
6. Loosen the screw (C) and move the unit for proper eye relief
adjustment.
7. The NVM-14 helmet mount has a flip-up mechanism. Push the
button (E) on the side of mount and lift the unit up until the unit
fixates in the top position. When the device is placed in the top/
up position it will turn off automatically.
8. Push the same button (E) to lower NVM-14 to viewing position.
Turn the device on for continuation of the operation.
9. The NVM-14 can be placed onto the right or left eye. In order
to readjust the monocular for use with the other eye, take the
unit off the headmount adapter, turn the unit to other side (for
180º) and mount it on the adapter through the Picatinny rail on
this side. Push the button (E) and move the device along the
slide-rail (F) for comfortable position.
C
d
Attaching ATN NVM-14 to Hlmet Mount
E
B
F
Figure 3-2
A
A
3-3