Mounting The Atn Nvm-14 To A Scope - ATN NVM14 Operator's Manual

Hide thumbs Also See for NVM14:

Table of Contents

D. MOUNTING The ATN NVM-14 TO A SCOPe OR

TElESCOpE

the NVM-14 may be mounted to a variety of daytime scopes/tele-

scopes utilizing the Flip-up Scope adapter Mount.

1. loosen the adapter fixing screws (a).

2. put the insert into the adapter (atN supplies inserts of diffe-

rent sizes for their coupling with 38 mm to 43 mm eyepieces).

3. Now attach the monocular to the bracket (B). You can push the

monocular rail into the bracket guide (C) and then take it off the

bracket only when you loosen the fixation knob (D) holding the

button (2) pressed at a time. With the fixation knob (D) tight-

ened you secure the monocular on the bracket.

4. push a daytime riflescope or telescope eyepiece into the

adapter attached to the monocular, making sure a small space

is left between the scope eyepiece and the monocular front

lens.

5. tighten the adapter screw (a) securely.

6. By pressing button (F) on the adapter you can raise the mon-

ocular 180 degrees upward in order to work with the daytime

scope only.

FIGURe 3.4. MOUNTING The ATN NVM-14 TO A SCOPe

3-5

Table of Contents