Table of Contents
Advertisement
3.1 MOUNTING pROCEdURES
A. MOUNTING THE ATN NVM-14 TO A HEAdMOUNT
To mount the ATN NVM-14 to a headmount, perform the following:
1. Loosen the screw (A). Push the button (B) and insert the rail of
the NVM-14 into the socket (C) of the headset.
2. Place the headmount with NVM-14 onto a head.
3. Loosen the screw (A) and move the unit along the rail for eye
relief adjustment.
4. The NVM-14 headmount has a flip-up mechanism. Push the
button (D) on the side of mount and lift the unit up until the unit
fixates in the top position. When the device is placed in the
top/up position it will turn off automatically.
5. Push the same button (D) to lower NVM-14 to the viewing
position. Turn the device on for continuation of the operation.
6. The NVM-14 can be placed onto the right or left eye. In order
to readjust the monocular for use with the other eye, take the
unit off the adapter, turn the unit to other side (for 180º) and
mount it on the headmount adapter through the Picatinny rail
on this side. Push the button (E) and move the device along
the slide-rail (F) for comfortable position.
3-2
d
B
A
C
Figure 3-1
Attaching ATN NVM-14 to Head Mount
F
E
Advertisement
Table of Contents
