Lacing The Sliding Bar Buckle - ATN NVM-14-3 Operator's Manual

C. LACING THE SLIdING BAR BUCKLE
While donning and adjusting the headmount, it is possible for a
strap to slip out of a slide fastener. Perform the following proce-
dure to replace the strap and sliding bar buckle.
Thread the strap from the inside of the buckle over the moveable
sliding bar (see Figure 6-2). Thread the strap back through the
buckle but this time under the sliding bar and over the serrated
part of the buckle.
Figure 6-2

Lacing the Sliding Bar Buckle

6-12