Table of Contents
Advertisement
2. R GAIN adjustment
Select R signal by pushing down the TEST OUT switch (side panel) from the RGB position towards
the SEL position.
Adj. point:
1RV1 (R)/VA-189 board
Specification:
The same as for G GAIN adjustment.
3. B GAIN adjustment
Select B signal by pushing down the TEST OUT switch (side panel) from the RGB position towards
the SEL position.
1RV3 (B)/VA-189 board
Adj. point:
Specification:
The same as for G GAIN adjustment.
Setting after adjustment
TEST OUT switch (side panel) → ENC
BVP-9500WS/9500WSP MM
3-2. Video Adjustment
VA-189 BOARD
RV3 (B)
RV2 (G)
RV1 (R)
3-15 (E)
Advertisement
Table of Contents
