Table of Contents
Advertisement
1-4. Replacing the Fan
4. Remove the three screws, and remove the fan bracket.
5. Remove the two screws, and remove the fan holder.
6. Install the new fan in the reverse order of removal.
[Note|at|installation]
Install the fan to the fan holder with care so that the label faces the bracket as shown in the figure for step
5.
1-16 (E)
Screw
Screws
(damper)
(damper)
Fan holder
Label
Fan
Screw (damper)
Screw
(damper)
Fan bracket
BVP-9500WS/9500WSP MM
Advertisement
Table of Contents
