Table of Contents
Advertisement
2-2-8. OHB Trimming page
n
To avoid incorrect operation, this page is not displayed at factory setting state.
To display this page because of performing adjustment, refer to "Section 2-1 Entering the OHB Trimming
Page".
After adjustment, be sure to reset the switch to the factory setting state (not to be displayed state).
* OHB Trimming *
[R] [G] [B]
V SUB
:
99
Clamp LEV :
0
SH: ON
SPM: Off
Gain: 3dB GB: OFF 56: OFF
All Preset: Sure?
File Store
Item
Setting
V SUB
_99 to 99
Clamp LEV
–99 to 99
SH
ON/OFF
SPM
Off 60/On 180
(for BVP-9500WS)
Off 50/On 150
(for BVP-9500WSP)
Gain
_3, 0, 3, 6, 9, 12
GB
ON/OFF
56
ON/OFF
All Preset
Press the MIC 1 LEVEL
knob to execute.
File Store
Press the MIC 1 LEVEL
knob to execute.
BVP-9500WS/9500WSP MM
(Display is initial values.)
99
99
0
0
60
Description
Adjusts the R, G, B CCD V substrate voltage.
Adjusts the Clamp offset.
Sets ON/OFF the black shading correction function.
Sets the field rate.
Off 60/50 : x1 speed
On 180/150 : x3 speed
Sets the master gain.
Sets ON/OFF the gain bounce mode.
Sets ON/OFF the function to set the color temperature to 5600K.
Returns the control data from the OHB trimming file to initial setting for
adjustment.
Registers the OHB trimming file and OHB file.
2-2. Details of Maintenance Menu
2-9 (E)
Advertisement
Table of Contents
