1-5. Replacing External Connectors
1-5-6. MIC 1 Connector
1. Unfasten the connector cap from the connector.
2. Remove the two screws and pull out the MIC 1 connector.
3. Desolder MIC 1 connector.
4. Install a new MIC 1 connector in the reverse order of removal.
1-26 (E)
Connector cap
MIC 1 connector
RK3 x 6
RK3 x 6
Pin 1 : MIC (G) shielding
Pin 2 : MIC (X) red
Pin 3 : MIC (Y) white
BVP-9500WS/9500WSP MM