Table of Contents
Advertisement
7 Expansion with data goggles
Setting up a connection using data goggles
1. Start the "SIPIX RC" Do not click "Start Session"
2. Open the browser "Google Chrome" via the application view on the data
goggles.
3. Call up the IP address of the SIPIX SD (https://xxx.xxx.xxx.xxx:5001/bt).
4. When the "Wait for Expert" window appears, the data goggles are ready for
use.
5. Wait for feedback from the Remote Expert. Then click the "Start Session"
button.
You see the camera image of your data goggles. The camera image is
transmitted live to the Remote Expert.
Note
During use, activate the key lock on the data goggles.
Press and hold the left button of the tracking pad.
Change of audio / video connection between SIPIX SD series and data goggles
1. Refresh the browser in which the live image transmission takes place with the
button ''
If this icon is not visible on the data goggles, exit full screen mode by pressing
the "Back" button on the Tracking Pad.
The "Waiting for Expert" window opens.
2. Start the Live Collaboration by clicking the "Start Session" button on the
SIPIX SD.
3. If you want to switch to the EPSON data goggles again, repeat steps 1 to 3.
SIPIX SD Series - Remote Services
Entry-ID: 109763098,
V1.0,
''.
01/2019
29
Advertisement
Table of Contents
