Standard Equipment; Options And Accessories; Safety Information - Fluke Calibration 525B User Manual

525B
Users Manual
Function Input
dc V
dc mA
Resistance
Thermocouple
RTD
Pressure

Standard Equipment

The items listed below are included with your Calibrator. If the Calibrator is
damaged or something is missing, contact the place of purchase immediately. To
order replacement parts or spares, see the replacement parts list in Chapter 6.
•
525B Getting Started Guide, Part No. 3064079
•
525B CD-ROM (contains the 525B Users Manual and 525B Getting Started
Guide), Part No. 3064087
•
Power Cord (120 V cord, Part No.1618621 or 240 V cord, Part No. 769422)
•
Thermocouple Shorting Jumper, Part No. 610747

Options and Accessories

For more information about these accessories and their prices, contact your Fluke
representative.
•
5520A – 525A Leads kit
•
Y525 Rack Mount kit
•
Fluke 700 and 525A-P series pressure modules
•
MET/CAL with 525B Function Select Code (FSC)
•
MET/CAL 525B calibration procedure

Safety Information

This Calibrator complies with IEC 61010, ANSI/ISA-S82.01-1994, CAN/CSA-
C22.2 No. 1010.1-92. Use the Calibrator only as specified in this manual,
otherwise the protection provided by the Calibrator may be impaired.
CAT II equipment is designed to protect against transients from energy-consuming
equipment supplied from the fixed installation, such as TVs, PCs, portable tools,
and other household appliances.
1-2
Shop for Fluke products online at:
Table 1-1. Summary of Input and Output Functions
None
None
0 to 4000 Ω (4-wire)
Yes
Yes
Yes
MyFlukeStore
www.
Output
0 V to 100 V
0 to 100 mA
5 to 4000 Ω (2-wire)
Yes
Yes
No
1.888.610.7664
.com