Table Of Contents; Introduction - Tecfluid LS Series Instruction Manual

TABLE OF CONTENTS

1 INTRODUCTION ...................................................................................
2 RECEPTION ..........................................................................................
3 INSTALLATION ....................................................................................
5 MATERIALS ..........................................................................................
4 TECHNICAL CHARACTERISTICS ......................................................
5 DIMENSIONS ........................................................................................
1

INTRODUCTION

The LS series level gauge is mounted on the top of the tank by means of a suitable flange
or coupling thread.
It consists of a float connected to a guide rod with a magnetic system on its end.
The float moves inside the tank, varying its height according to the liquid level in the tank.
The float is designed for the specific gravity of operating liquid.
The magnet assembly at the end of the guide acts on the indication system (external
magnetic follower or magnetic strips, mounted externally to the tank), obtaining an indirect
level reading of the tank. It also acts on the optional switches installed in the indicator.
3
3
4
4
5
6
7