Advertisement
The mounting position of the gauge is vertical on top of the tank. The float level varies
according to the level of the liquid.
Introduce with care the float through the mounting hole until the flange or coupling thread
couples with the tank. If the diameter of the float is larger than the tank hole, the float
should be removed by unscrewing it, and reassembled from inside the tank.
Fix the flange with the appropriate nuts and bolts or screw the level gauge to the tank.
In the case of a coupling thread, turn until tight. Do not apply torques greater than 60
Nm.
4
MATERIALS
Models LS
Models LSL
5
Advertisement
