JLG 100HX Operators & Safety page 70

SECTION 4 - MACHINE OPERATION
After towing the machine, complete the
following:
1. Actuate steer/tow selector valve for steering; push
valve knob IN to the actuated position.
2. Reconnect drive hubs by inverting disconnect cap.
(See Figure 4-5.)
3. Disconnect towbar from steering hitch and from tow-
ing vehicle. The machine is now in the driving mode.
4-12
Figure 4-6. Drive Disconnect Hug
– JLG Lift – 3120889
Courtesy of Crane.Market