Kernau KFCF 1401 W User Instruction page 28

WARNING!
Do not use other electrical appliances (such as ice cream makers) inside of refrigera-
ting appliances, unless they are approved for this purpose by the manufacture.
WARNING!
Do not touch the light bulb if it has been on for a long period of time because it could
be very hot.1)
• Do not store explosive substances such as aerosol cans with a flammable propel-
lant in this appliance.
• The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the
appliance, a natural gas with a high level of environmental compatibility, which is
nevertheless flammable.
• During transportation and installation of the appliance, be certain that none of the
components of the refrigerant circuit become damaged.
- avoid open flames and sources of ignition
- thoroughly ventilate the room in which the appliance is situated
• It is dangerous to alter the specifications or modify this product in any way. Any
damage to the cord may cause a short circuit, fire and/or electric shock.
• This appliance is intended to be used in household and similar applications such as
- staff kitchen areas in shops, offices and other working environments;
- farm houses and by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments;
- catering and similar non-retail applications.
WARNING!
Any electrical components(plug, power cord, compressor and etc.) must be replaced
by a certified service agent or qualified service personnel.
WARNING!
The light bulb supplied with this appliance is a "special use lamp bulb" usable only
with the appliance supplied. This "special use lamp" is not usable for domestic
lighting.1)
If there is a light in the compartment.
1)
• Power cord must not be lengthened.
• Make sure that the power plug is not squashed or damaged by the back of the ap-
pliance. A squashed or damaged power plug may overheat and cause a fire.
• Make sure that you can come to the mains plug of the appliance.
• Do not pull the mains cable.
• If the power plug socket is loose, do not insert the power plug. There is a risk of
EN
28