Download Print this page

Apex Digital iX Fit Instruction Manual page 12

Cpap system
Hide thumbs Also See for iX Fit:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
iX Fit / English
iX Fit CPAP device can be used with iX Heated Humidifier (Optional) WITH Light grey tubing.
Place the heated humidifier on a stable level surface. Release
the bottom pad from above without pressing the button. The
heated humidifier system may reduce nasal dryness and
irritation by providing adequate moisture and heat to the
airflow.
Connect the device with heated humidifier horizontally.
Note : Please make sure the humidifier is inserted to device
completely to reach desired performance.
Hold the water chamber at the top and bottom and take the
chamber out by the right side.
Caution: Beware of burns when removing the water
chamber.
Open the top cover and fill it with distilled water up to the
maximum water level mark, then close it. Slightly wipe the
exterior of the water chamber with a dry cloth. Insert the
chamber back in the humidifier and make sure both are
properly connected.
Warning : Do not overfill the water chamber as water
may enter the device.
Caution:After filling the water, keep the water chamber
at level position before assembling with the device.
Caution: Please fill the water chamber only with room
temperaturepure water (about 20°C/68°F).
9

Hide quick links:

Advertisement

loading