Apex Digital iX Fit Instruction Manual page 31

iX Fit / English
Appendix A: EMC Information
Guidance and Manufacturer's Declaration- Electromagnetic Emissions:
iX series is intended for use in the electromagnetic environment specified below. The user of this device
should make sure it is used in such an environment.
Emissions Test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC61000-3-2
Voltage fluctuations /
Flicker emissions
IEC61000-3-3
Warning:
1. iX series should not be used adjacent to or stacked with other equipment. If adjacent or stacked use
is necessary, the device should be observed to verify normal operation in the configuration in which it
will be used.
2.Use of accessories, transducers and cables other than those specified or provided by the
manufacturer of this equipment could result in increased electromagnetic emissions or decreased
electromagnetic immunity of this equipment and result in improper operation.
3. Portable RF communications equipment (including peripherals such as antenna cables and
external antennas) should be used no closer than 30 cm (12 inches) to any part of the device,
including cables specified by the manufacturer. Otherwise, degradation of the performance of this
equipment could result.
4. If there is a possibility of electro-magnetic interference with mobile phones, please increase the
distance (3.3m) between devices or turn off the mobile phone.
5. Please avoid exposure to specific potential electromagnetic disturbance sources that are known
sources of electromagnetic disturbance. Electromagnetic disturbance sources might be concealed
and the device can potentially be exposed to fields from these RF emitters without the user's
awareness. The user is encouraged to try to correct the interference by ensure the separation
between the equipment of ≧0.15m.
Compliance Electromagnetic Environment-Guidance
iX series uses RF energy only for its internal function.
Group1
Therefore, its RF emissions are very low and are not likely to
cause any interference in nearby electronic equipment
Class B
iX series is suitable for use in all establishments, including
Class A
domestic establishments and those directly connected to the
public low-voltage power supply network
Complies
28