Coding 2 - Viessmann VITOTRONIC 200-H Installation And Service Instructions Manual

Coding

Coding 2

Calling up Coding 2
1234567
Summary
Coding in the factory default setting
General
Sensor aJ not installed
4b: 0
Connection on plug gS M1:
4E: 2
Mixing valve motor
76: 0 Without communication module
42
1. Press the and
approximately 2 seconds, until the first arrow appears;
confirm with .
2. Select the required coding address with
Select the coding address, the address flashes; confirm
with , the value flashes.
3. Change the value with
The display briefly shows Adopted the address flashes
again.
Call up further addresses with
4. Press the and
approximately 1 second.
Possible change
Sensor aJ installed
4b: 1
(e.g. return temperature sensor); automatic
recognition
4E: 0 Without Function
and
4E: 1
76: 1 With LON communication module; automatic
recognition
76: 2 With Viessmann 2-wire BUS communication
module; automatic recognition
buttons simultaneously for
or
or ; confirm with
or .
buttons simultaneously for
;
.