How To Access The Programming Function; Programming The Coffee Measures; Programming The Hot Water Measures; Water Level Control Of Boiler - La Cimbali M29 Select Use And Installation

To enter the programming mode, press push button (20)
and keep it pressed for a few seconds; the buzzer sounds
intermittently.
To exit the programming mode, after programming the
various drinks, press push button (20) again for less than
1 second.
" Before programming the coffee dispensing
correct serving of ground coffee. Don't use
coffee grouts for programming servings. "
coffee dispensing.
unit, positioning the cup (or cups) under the nozzle (or
Press (and keep momentarily pressed) the coffee
dispensing push button (16, 17, 18 or 19) corresponding
to the required serving to be programmed.
When the amount of coffee in the cup reaches the required
level, release the coffee dispensing push button.
Repeat the above operations for the other coffee push
buttons.
Position a suitable container for the amount to be
programmed under the hot water pipe (8).
Press (and keep momentarily pressed) the hot water
dispensing push button (9).
devices to keep the water in the boiler at a pre-set level.

15. How to access the programming function

16. Programming the coffee measures

10) on the coffee dispenser
10).

17. Programming the hot water measures

18. Water level control of boiler

16 17 18 19
When the amount of water in the container reaches the
required level, release the push button (9).
11 EN
20 20
9
8