Table of Contents
Advertisement
1.5 Programming measurements
1
Press the icon
.
4
When one of the coffee keys is pressed (for example Key 1),
the following parameters are displayed on the services display:
water dose;
pre-infusion time;
The key in question will remain highlighted on the unit
display.
5
Possibility to change the colour associated with each key type.
6
By pressing the key
the following screen appears on the services display:
2
Press one of the coffee groups
(example Group 3).
wetting time.
All parameters can be adjusted:
water dose (using the
pre-infusion time (using the keys
wetting time (pressing the icon
will allow the time to adjusted with the keys
when the adjustment is complete).
Press the
icon to confirm the information entered.
EXAMPLE
Grinder/dispenser selected can be associated with each key type.
, the dispensing starts and
3
The programmable keys' icons are
shown on the display.
NOTE. THE
key can also be programmed as DOSED:
press the
icon on the parameter display screen:
Press the
icon to return to CONTINUOUS mode.
The other functions of the
in both configurations.
and
keys);
will transform the icon into
:
shows the duration in seconds of the pre-infusion
phase.
shows the duration in seconds of the wetting
phase.
The parameters displayed are:
Dv: Volumetric meter incremental counter
tG: dispensing time
TB: instant coffee boiler temperature
RB: % activation coffee boiler heating element
P: service boiler pressure
SL: service boiler water level; % level signal
Rc: service boiler heating element
Evc: Boiler-water-supply solenoid valve
TV: Turbosteam wand steam temperature
11 EN
key will remain unchanged
);
. Press the
which
icon
Hide quick links:
Advertisement
Table of Contents
