Programming Measures Function; Water Dose Programming - La Cimbali M100 GT Engineer's Manual

1
3
The icons of the programmable keys
are shown on the services display; the
numbers relative to each key appear on
the group display.
key makes it possible to
The
program water doses with the SELF-
LEARNING function (see specific
paragraph).
5
By pressing the
the following screen appears on the services display:
1
.
Press the icon

5. Programming measures function

Press the icon
.
key, the dispensing starts and

Water dose programming

2
Press the
SET... - to set the dispensing time;
% - to set the water temperature.
NOTE. -
- the TESTING phase for the water keys is similar to that of the coffee
keys.
Press the
2
4
By pressing one of the coffee keys
(e.g. key 1), the relative water dose
is shown on the services display and
the icon of the key in question remains
highlighted on the group display.
The parameters displayed are:
Dv: Volumetric meter incremental counter
tG: dispensing time
TB: instant coffee boiler temperature
RB: % activation coffee boiler resistance
P: service boiler pressure
Liv: service boiler water level; % level signal
Rc: service boiler resistance
Evc: service boiler load solenoid valve
TV: Turbosteam wand steam temperature
icon. These parameters can be configured:
the red border around the icon indicates the key being changed.
icon to confirm the information entered.
10 EN
Press one of the
c o ff e e k e y s ( e x .
Group 3).