Other Hot Beverage - La Cimbali M29 Select Use And Installation

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 22
Steam dispensing
Plunge the steam jet pipe (6) into the liquid to be heated in a
suitable container and turn the steam adjustment knob (7).
knob (7
Cleaning of steam dispensing pipes
At the conclusion of each steam dispensing
phase:
- Using a clean sponge, wash with hot water
removing any organic residue present. Rinse
carefully.
- clean the inside of the steam nozzle as
follows:
Turn the nozzle towards the cup tray and
carefully activate steam dispensing at least
once.
Dispensing with the Turbosteam selector (7a) (when
provided)
Machines equipped with the TURBOSTEAM (STOP
STEAM) dispensing system have the "stop steam
dispensing when set temperature is reached" function, and
can rapidly heat and froth milk.
Select the type of milk you desire:
-
using the knob (7a), clockwise (frothed) or counter-
clockwise (hot).
When the set temperature is reached, steam dispensing
can be stopped:
- automatically;
- manually, turning the knob (7a) in in any direction.
Temperature setting
The temperature setting for the "Stop Steam" function is
user.
Nevertheless, the standard setting can be changed within
To make this change:
-
switch off the machine;
-
remove the right side
-
adjust the setting (R) on the Turbosteam card, keeping
in mind the corresponding number of notches and
temperature:
The indication of intermediate temperatures is approximate;
after each adjustment, please use a thermometer to
determine the actual set temperature.
The ideal setting for milk frothing is set in the factory.
adjustment valve (A):
-
counterclockwise: more air > more frothy milk
- clockwise: less air > less frothy milk

16. Other hot beverage

7
6
View of the right side of the machine
Note: even slight turns of the valve (A) can make a
great difference in how the milk is frothed.
Scalding
hazard!
Use
insulating devices
to move the water and
steam wands.
A
Correct alignment of the steam thermocouple
is performed in the factory: for this reason,
do not turn the adjusting screw (T).
the
appropriate
7
6
7a
T
R

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents