Hot Water Dispensing - La Cimbali M39 GT R2 Use And Installation

Press the
the display:
22 April
wednesday
88.6°C
If any dispensing key is pressed of the group with the
disabled boiler, this message appears on the display screen:
22 April
wednesday
GROUP x LOCKED
BOILER OFF

16. Hot water dispensing

Scalding hazard! Use the appropriate
insulating devices (A) to move the water and
steam wands.
The dispensing of hot water is controlled by the economizer
which permits mixing hot water from the boiler with fresh cold
water from the mains and controls its temperature.
With this system, water quality is improved and assures the
best results for the operator.
After having placed an appropriate container under the
dispenser (8), proceed in either of the following two ways:
- Press the DOSING BUTTON (12) that has the appropriate
memorization.
- For CONTINUOUS dispensing, press the STOP push
button (35).
Dispensing, whether for dosed servings or in the continuous
dispensing mode, can be interrupted at any time by pressing
the START-STOP push button (35).
NOTE:
- When using any of the dosing buttons, dispensing
can be interrupted by pressing the STOP button
(35); the memorized data will not be affected.
- The adjustment of the economizer for regulating
the delivered water temperature is made by the
installing service technician.
OFF on
2015
15:15:04
90.4°C
2015
15:15:04
15 EN
Switching on the boiler takes place in the same way:
• Press the " ; key;
• Press the "STOP/continue coffee" key (C) of the group
for which you want to switch on the boiler. The word ON
will appear in the icon for that group;
• Press the
12
A
35 12
8