Table of Contents
Advertisement
1
7
4
5
Fresh air supplied through the
floor.
1) Spigot
2) Hose clamp
3) Flexible hose
4) M5 screw
5) 3 mm Unbrako key
2
6) Valve
7) Double-sided adhesive gasket
1
Place the foam ring (8) over the hole in the floor and place
the stove on the ring so that the hole in the base plate is
4
within the diameter of the foam ring.
Secure the flexible hose (3) on the spigot (1) using the
5
hose clamp (2). Fit the spigot on the stove with the four
M5 screws (4).
6
Secure the valve (6) on the base plate using the double-
sided adhesive gasket (7) and fit the flexible hose (3) on
the valve (6) with the hose clamp (2).
7
8
2
Air-System
3
6
7
8
2
3
2
1
4
5
6
7
8
2
3
2
16
Advertisement
Table of Contents
