Parking Brake/Transport; Immobilizer System; Security Key - pellenc RASION 2 EASY Operating Instructions Manual

To lock the rotation of the front wheels, turn the 2 pins in
front of each wheel to the vertical.
In this position, the front wheels are free and the mower
can be turned in any direction without constraints.

5.3.9. PARKING BRAKE/TRANSPORT

When the mower is stationary and the blades are not rotating, put the cutting height adjustment handle (16) into
"parking /transport brake" mode, to secure the mower on sloping ground or on embankments. In this position the
cutter deck housing comes into contact with the rear wheels and acts as a brake. The mower can therefore neither
move forwards nor reverse and cannot be pushed.
Firmly hold the cutting height adjustment handle (16)
while simultaneously pressing the 2 buttons to release
it from its position and tilt the handle beyond the 25mm
position.
Caution
Always check the blades and wheels have stopped before putting on the brake. When the brake
is on, do not operate wheels or blades.

5.4. IMMOBILIZER SYSTEM

5.4.1. SECURITY KEY

Note
This lawn mower is fitted with a key immobilizer system that prevents the motor from starting if the key is not
in its socket. This system helps to limit the risks of accidents and theft.
24
LAWN MOWER RASION 2 EASY
59_141654-B
59N_18_075
59N_18_052