Commissioning; Unfold The Mower Into The Working Position - pellenc RASION 2 EASY Operating Instructions Manual

4. COMMISSIONING

In the packing box, the mower is in the transport position.
The handlebar (7) is folded forward and held in place
both by the cutting height adjustment handle (16) and the
handlebar adjustment lever (18).
To start using the mower, the mower must be unfolded
and in the working position.

4.1. UNFOLD THE MOWER INTO THE WORKING POSITION

Unlock the adjusting lever (18) by pulling it back towards
the rear.
With one hand, hold the cutting height adjustment handle
(16) while simultaneously pressing on the two buttons to
release it from its position.
Hold the buttons down and pull the handle backwards.
With your other hand, release the handlebar (7) and
reposition the handle in the notch in which it was en-
gaged.
Release the buttons and ensure that the handle is cor-
rectly locked.
12
LAWN MOWER RASION 2 EASY
59_141654-B
59N_18_030
59N_18_028
59N_18_029